New view

[Mike Cecil]

Lang,

Nice shed .... steel framed, too: not a thing I was able to find in this part of the USA. The new 24 x 36 (FEET) 'shop' (it's what the locals call a shed) was purchased from 'Steel Structures of America' ... and it's framed in treated timber!! Only the cladding is steel.

Ahh, for a good Aussie steel framed shed.

Mike C

[hrpearce]

The wall is on the skillion, the workshop trailer is inside and the BLITZ is home.
I have two weeks to ajust the brakes before the rego check.
The shed posts are new but the rest is recycled. The timber is out of Mum's old house and the wall is an old water tank and the roof iron is off an old carpoart.

[hrpearce]

The decking on the bridge in the paddock was getting dangerous so my brother in law set up his portable mill and fell six trees. I sniged the logs and used the front end loder to place them in the mill. We maimly cut 8x4s and a fiew 6x4s. I have delivered two trailer loads and the FEL was used to remove old deck and lay the new decking, one more trailer load needed to finish. The good news is we cut five too many.

[Keith Webb]

Nice work Robert, I love that sort of stuff. I once had a Granberg mill with a Stihl 076 and slabbed a lot of wood, but it was hard work. A portable mill is probably still a lot of work but a lot more productive.

[Mike K]

Originally Posted by hrpearce

The decking on the bridge in the paddock was getting dangerous so my brother in law set up his portable mill and fell six trees. I sniged the logs and used the front end loder to place them in the mill. We maimly cut 8x4s and a fiew 6x4s. I have delivered two trailer loads and the FEL was used to remove old deck and lay the new decking, one more trailer load needed to finish. The good news is we cut five too many.

That's a neat job Robert .

Around here , untreated hardwood is termite fodder . Treated pine is the only way to go for anything near the ground . I've seen shed roofs collapse because of those pesky critters . Mike

[hrpearce]

Keith, I remember those slabbers and they were hard work and the cut was about three times as wide as the tungstan tiped blade in the mill. Although slower than a proper mill the timber is just as good and the latest model is much easier to ajust and use compares to the original.
Mike, the termites are becoming a problem here too and the only alternative for a bridge this long is steel.

[Mike K]

Originally Posted by hrpearce

Keith, I remember those slabbers and they were hard work and the cut was about three times as wide as the tungstan tiped blade in the mill. Although slower than a proper mill the timber is just as good and the latest model is much easier to ajust and use compares to the original.
Mike, the termites are becoming a problem here too and the only alternative for a bridge this long is steel.

It might be worthwhile applying some sump oil onto those bridge timber planks , every 6 months . Keep the termites at bay .

A chap down the road here made a access bridge for his property by felling a huge tree and placing it across the creek , he owned a D8 dozer at the time. The shire placed a sign on the road stating that "use this bridge at your own risk , its not our fault if you fall " . They said nothing about the huge tree he felled ! figure that out

[hrpearce]

Mike I might give the sump oil a try.
Working on the BBQ area again we finally have enough in the bank for the concrete. We are coming to a dead line as Greg will be 18 in February so we need it finished.