Another C60L Restoration

[Keith Webb]

The wider seat is late production, no doubt due to complaints!

[Tony Mathers]

Originally Posted by Keith Webb

The wider seat is late production, no doubt due to complaints!

Thanks Keith.

[Tony Mathers]

I visited the Army Museum Bandiana today to measure up and photograph the Blitz and Studebaker Workshop trucks. The very informative and helpful WO2 Ian Pullen was on duty and was able to show me around.

restore 22.jpg

I was able to get lots of measurements and information on the little known parts and toolbox's on the workshop body. Including these bits:

restore 20.jpgrestore 21.jpg

After that I visited Empire Trading & Disposals Company near Wangaratta and got some lovely new bits for my truck, including M113 lights for the taillights, a 1940 pick and a WWII Camouflage net to hide the truck from my wife.

[Tony Mathers]

I just finished my Phil Waterman style engine stand this morning (Thanks for posting the design mate) and put it to the test straight away.
restore 22stand.jpg

My son who happened to be home from school today woke up before Midday (I was stunned!) and decided it was a good time to start playing with my Truck.. (Its mine son, mine!)

So we cleaned the crud off the gearbox and then tried to take it off, Boy was it on tight... so we kept going back to cleaning the engine. I rang Euan for some advice (Did I remember to say thanks?) Since we were positive it was the gearbox that was stopping the pistons moving we started pulling the gearbox apart where it was...
restore 23.jpg restore 24.jpg

Yuck was it a mess, it appears condensation or something had over a period of time filled the gearbox with water.. It was a great excuse to set up the molasses bin and after buying a 3/4 ring spanner and an extra half hour of toil the whole lot went for a swim in molasses.

restore 25.jpg restore 26.jpg

The best part is, the pistons and bearings appear to be in great shape. The head needs a lot of work, but appears to be fine as well.

My son and I had so much fun we decided we should complete the engine rebuild ourselves.

Thanks Euan and Phil for all your help.

[Keith Webb]

I have a spare Chev gearbox if you need... that one looks like it will sound like one of the ones in Tony Wheeler's collection...

[Phil Waterman]

Hi Tony

You may be surprised how well that transmission will clean up. I've seen worse that have cleaned up and worked for years. One of mine was like that it was half full of water when I got it. Completely disassembled and cleaned everything polished the gear teeth with the scotch disks, replaced the bearings drove it for a lot of years. Not the quietest transmission I've ever had but was worth it.

Engine stand looks good.

Keep us posted on your progress

Cheers Phil

[Tony Mathers]

Thanks Gentlemen at this stage I will see how it cleans up, as most of the rust came off before I put the gearbox in the molasses.