wiper fittings

[Eric R.]

Where did you get that little junction block to connect the metal lines? My cab 13 is missing the entire system so I have no reference on what parts are needed and where they go but your pics are a big help.

thanks!

Originally Posted by Ganmain Tony

Gday Arthur, Eric & Tony,

Those photos in Tony's first post are of my truck which is a Cab 12 F60L.

The wiper units are original, the steel piping is not nor is the rubber flex hose to the Carburettor. (The hose I used is vacuum wiper hose available from Macs).

Have had a look at few Cabs with the remanants of the original piping and the set up in mine is very close, if not bang on, original.

Rubber hose is used from the Carb and mates up with steel piping (Just at the bottom of the windscreen).