|
|
|
|
#1
24-09-16, 21:27
|
||||
|
||||
Quote:
Quote:
I'd be in for a set or two, and there are many dozens interested British/Canadian vehicle owners here in The Netherlands. Most if not all would want to know technical details (load, speed and legal ratings), if they fit British rims and the price, before committing to buy. Very interested to see how this develops 
__________________
Regards, Hanno -------------------------- 
|
|
#2
25-09-16, 03:10
|
|||
|
|||
|
Following up....
Gentlemen: I just spoke with Ryan and he has requested the info that we are all looking for. He has also requested one/two tires as samples to try out and give us a report. Getting info out of China is not the easiest thing in the world. So we'll cross one bridge at a time and see where all this goes.
Keep you posted either way......Robert
|
|
#4
27-09-16, 19:15
|
||||
|
||||
|
Just a quick update. They have sent me more pictures of the tires which I will post later. There is good news and bad.
They aren't DOT approved and they have no tires in stock to send a sample. Tire Size 9.00-16 Ply 12 Standard Rim 6.5H Max Load S/D 1530/1350kg Pressure 530kpa Section Width 255mm Overall Diamete 890mm Ryan
__________________
The Frontenac Battalion '95 Enfield Military Bullet '92 Dnepr w/side car '85 Iltis & Trailer '85 Iltis ‘85 Itils w/Tow Package ‘85 MLVW MRT ‘85 HMMWV M1043 '71 M35A2 ‘66 FV432 Mk 2/1 ‘66 Ferret Mk 2/3 '55 M43 '55 M37CDN '55 M37CDN ‘53 M38A1CDN '52 M135CDN ‘52 M38CDN ‘40 Something Universal Carrier M113A3 Plus a dozen LSVW’s.
|
|
#5
27-09-16, 21:44
|
|||
|
|||
|
You said good news and bad news. What was the good news?
The specs look good. Weight rating of 3373 pounds when mounted in singles is enough even to handle a KL welding lorry. Any word from them if there is a speed restriction? On photos that I saw earlier, it would appear that they will require some skiving to go straight onto the cmp rims, but that is not unusual.
|
|
#6
28-09-16, 00:12
|
||||
|
||||
  
__________________
The Frontenac Battalion '95 Enfield Military Bullet '92 Dnepr w/side car '85 Iltis & Trailer '85 Iltis ‘85 Itils w/Tow Package ‘85 MLVW MRT ‘85 HMMWV M1043 '71 M35A2 ‘66 FV432 Mk 2/1 ‘66 Ferret Mk 2/3 '55 M43 '55 M37CDN '55 M37CDN ‘53 M38A1CDN '52 M135CDN ‘52 M38CDN ‘40 Something Universal Carrier M113A3 Plus a dozen LSVW’s.
|
|
#7
28-09-16, 01:28
|
|||
|
|||
|
catch 22
Ryan
Thank you for taking the lead on this project and I hope you have the patience of Job. Sounds like this is catch 22, they can send a picture of a tire but, have no tire to send for a sample. They probably wont produce several tires for a sample but, want a commitment for 100 sets. We await further developments. Gord
|
|
#8
13-05-17, 12:57
|
||||
|
||||
|
"Standard rim 6.5H" means these tyres are for American rims which are 6.5-inch wide. Commonwealth spilt rims are 6-inch wide, and of course 0.25-inch larger in diameter.
If this pattern is available on the European market I would turn down my rims to make them fit, though! Did anyone have any luck sourcing these? Thanks, Hanno Quote:
__________________
Regards, Hanno --------------------------
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CMP Tire sizes? | Pedro Bedard | The Softskin Forum | 22 | 17-06-16 19:58 |
| Wanted: 900 X 13 Tire | CWO (ret) Gilles Aubé | For Sale Or Wanted | 4 | 30-01-16 05:31 |
| Wanted: 7.50-20 tire | chris vickery | For Sale Or Wanted | 0 | 15-07-15 15:41 |
| Need your Help: Tire ID | Kuno | The Softskin Forum | 5 | 01-07-09 08:34 |
| Rim for 9.00 by 13 Tire - for my F8 | Jim Price | The Softskin Forum | 0 | 02-12-08 01:41 |
Hybrid Mode
