Canadian Ferret surfaces in NJ

[Paul Salaterski]

Hey Gents,
I decided to spend some time on the Ferret after work today. Almost a full shift later and I've had mixed results with those numbers. What I did find is that all five of my external compartment latches have the same number stamped in them. They are also all individually stamped. The first stamp in the photo above is clearly visible while the remainder are extremely light. They are visible, but the stamps are NOT deep. It would be very easy to remove them with a little too much pressure. I NEVER would have noticed these if that first latch stamp hadn't been struck so well. I used a little bit of aircraft stripper to lightly soften the paint and then used a pocket knife with light pressure. I don't believe that a manufacturer would stamp the same part number into both left and right-sided latches and stamp them individually and so poorly at that. I'll post some more photos as soon as I'm back home. Thanks, Paul