Getting Restoration Bren carrier MK2

[Israel Berko]

This week we took a great step ahead.
We painted the inside hull and today we put back the tracks in the right direction.
It was a rainy day and very cold.

https://www.youtube.com/watch?v=VsZJ...ature=youtu.be

[Israel Berko]

The vehicle goes to a show at the kibbutz that gave it. We prepare it for the show.

[Israel Berko]

I have this switch the letters listed not exactly like in the book anyone know how to connect or what each pin and pin and where connects?
Anyone have a schema?

[Lynn Eades]

Hi Israel, does this help? It is early British Carrier.

[Israel Berko]

Thanks Lynn, I need exactly the pins that the switch connects in each and every position for example B and T and so on

[Ron Pier]

If you connect a live feed to B or the equivalent terminal in the center, and then with a test lamp on each terminal as you rotate the switch, it should be quite simple to determine which terminal does what.
B = Battery
T = Tail lamp
S&T = Side and Tail together
All = Headlamp, side and tail.

Ron

[Lynn Eades]

It uses an earth return system via the "bus" bar. As you will notice the battery is positive earth (which you can change if you wish) (I run 12 volt negative earth in my carrier)
I have put a remote solenoid down by the battery to avoid running battery cables to and from the start button.