CMP Ford F60S

[Jacques Reed]

Originally Posted by Mike Cecil

Hi Jacques,


The 'G' in the Ford 'engine' number actually stands for the combination of a 3-3/16/95hp/239 cubic inch engine coupled with a 4-speed heavy-duty truck gearbox, so the number actually indicates more than just the engine, but the complete engine-gearbox assembly. So perhaps the thinking was it didn't matter where the ID number was stamped? As you know, in Aust, the 'engine' number was stamped on the front top flat of the engine block and not on the gearbox. (It was also stamped on the front right top face of the chassis in Aust assembled Fords).

Mike

Hi Mike,

The photo I posted of the number stamped on the gearbox is on my F-15A. It corresponds with ARN 55166 and had an Australian cab and diamond plate floor so I assume it was Australian assembled. I've had three chassis and none were stamped. All had Australian cabs. Another collector believes not all chassis were stamped.
Both my engines are 1946 blocks but have no Ford s/n's. They do have later state issued numbers that are located at the top left rear of the block. Will have to look at a wartime built engine to see the serial numbers you mention. Being 1946 engines perhaps they were replacement engines and therefore not stamped by Ford?

Cheers,