|
|
|
|
#1
18-11-25, 06:09
|
||||
|
||||
Length
How long is the bolt ?
: Can you measure the length of the middle section where the two holes are and the threaded section length ? Will be useful to know the dimensions - if anybody else needs one of these special bolts, we will have a reference.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 18-11-25 at 07:05. 
|
|
#2
18-11-25, 10:29
|
||||
|
||||
|
Attempt ?
Haven't used my lathe for so long, needed some practice.
This is a prototype...it's too long, I need the proper measurements. A 9/16 unf nut fits on it snug.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#3
22-11-25, 21:48
|
|||
|
|||
|
Email sent
Larry
|
|
#4
23-11-25, 06:10
|
|||
|
|||
|
The bolt arrived and is 9/16 national fine thread so it is not a match. The bolt i got from Robert is definitely 18 threads per inch.
Larry
|
|
#5
23-11-25, 07:07
|
||||
|
||||
|
Confused
Quote:
Hi Larry I’m confused now. 9/16 unf is 18 tpi.. I wrote earlier, there's a good chance it is 1/4 National Pipe , which is 18 TPI.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 23-11-25 at 09:32.
|
|
#6
24-11-25, 06:47
|
||||
|
||||
|
More
I still need a critical measurement: the length from the shoulder to the end.
This is my attempt but it' was done flying blind .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 24-11-25 at 06:55.
|
|
#7
24-11-25, 17:33
|
|||
|
|||
|
That length is 1.120 inch. The bolt you made looks awesome.
Cheers Larry
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted: Oil filter fitting | Francois Buloup | For Sale Or Wanted | 4 | 30-01-20 10:34 |
| For Sale: No12 cab roof hatch fitting | rnixartillery | For Sale Or Wanted | 0 | 02-01-20 14:59 |
| Front wheel cylinder fitting | M38CDNBill | Parts/Sources/Prices | 6 | 08-11-17 16:51 |
| Fitting tall guys in Cab 11/12's | svdwal | The Softskin Forum | 35 | 22-03-16 02:27 |
| LP2A fitting question | Lynn Eades | The Carrier Forum | 15 | 08-10-11 21:47 |
Hybrid Mode
