GS bodies
Hello Tim
As Keith said , there are a number of CMP 15 cwt GS bodies around . Over the years I have seen them , the GMH built ones outnumber the Canadian examples by a long way . That is a GS no. 2 ? Keith has pictured .
If you find one , more than likely it will be badly bashed about and rusty . One good thing though , the panels are flat and if you have access to the correct gear eg. metal folder and guilotine you can make up new panels . A drawback is , they used heavy gauge metal around 14 gauge which makes it more difficult . Try the local TAFE college engineering Dept. and enroll in a basic course , then you have the use of their equipment !
Good Luck
Mike
|
05-12-03, 15:42
Hybrid Mode
