|
|
|
|
#1
10-05-08, 22:47
|
|||
|
|||
Turning it over
If you sand out the rust, and then pour some diesel in each cylinder and set fire to the diesel, the heat from the slow burning fuel will warm things up, and probably free it up. You may even get enough heat from the little bit that sits around the outside of the piston with the hole in it. If that doesnt work, drill the hole and tap a bolt into it, to stop the diesel running through.
The diesel may have to burn for maybe an houror more. Try it!
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
10-05-08, 23:34
|
|||
|
|||
|
Too late! Zipcut made short work of the crank.
If anyone needs peripherals for the 216 let me know before I throw it out.
__________________
Shayne 1944 MACH-ZL-2 I don't know the same things that you don't know.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
