C15A wrecker

[Alex Blair (RIP)]

Originally Posted by Hanno Spoelstra

Most definitely! There was no CMP 15-cwt Wrecker that rolled off the production lines during WW2.

The stampings on crane are most likely from the steel beam manufacturer in Scotland, not of the crane manufacturer.

Hope this helps,
H.

Hanno..
I agree...no C or F 15 wreckers..
All as Grant says on 3 ton Chassis only..starting at the F and C-60S...The shocks,springs and frames were too light ,even on the F and C 30 models..although you will find F and C 30 Wreckers ,but with upgraded springs and suspensions to C and F 60 specs..