Hi All,
I picked up the rims from the sandblaster on saturday and undercoated them all as well as a few other parts.The wheel cylinders,shoes and new brake lines were picked up also after sleeving and bonding.I am going to top coat the rims in the next few days so i will be picking up the tyres ready for fitting.If i get some time this week i will have all the brakes/hubs back together after a package arrived today from Ross Prince with all the seals,master cylinder etc.I had a brake concentric setting tool made by Shepard Thomason CO in the work shop from the days of my 69 Mack Flinstone.These tools are used for getting the brake linings concentric with the axle a must for 100% contact.So out it came back in service it goes.Just goes to show if you keep something long enough you will use it again.I finished mounting the winch,new seals etc also.In the photo there are a couple of non cmp parts as i had an under coating frenzy.The A frame is to suit the C15A as i planed to flat tow it but floated it instead. Until next time happy restoring. John Stokes
|
25-08-08, 13:30
Threaded Mode