Former British FGT cab 12 in Australia

Tony Smith · #1 31-08-08, 09:27

Quote:

Originally Posted by Bob Moseley

I also notice that one of the switches is labelled "Dome". All the switch plates I have seen this is labelled "Dash".

Bob

Bob, the 11/12 Cab GTs had an interior light, so have 1 switch marked "Dome" and another for the "Dash" lamps, as visible in the pic (note there are 5 switches in total). The early 11 cabs with push/pull switches had the switches arranged in a different order.

Bob Moseley (RIP) · #2 31-08-08, 10:32

Thanks Tony - just about every time I look at an instrument panel or housing there is a new difference. And here again the housing is different with the extra switch hole and the brass plate where the Ford script is normally fitted. Was this peculiar to the 12 GTs and where you say "11/12 Cab GTs", was there an 11 GT?

Bob

Keith Webb · #3 01-09-08, 09:55

Quote:

Originally Posted by Bob Moseley

Thanks Tony - just about every time I look at an instrument panel or housing there is a new difference. And here again the housing is different with the extra switch hole and the brass plate where the Ford script is normally fitted. Was this peculiar to the 12 GTs and where you say "11/12 Cab GTs", was there an 11 GT?

Bob

I've seen one other with the brass plate where the Ford script should go - a F60L and the plate was the contract number. There were cab 11 FGTs. The cab 11 ones used different switches too.

aj.lec · #4 03-02-09, 09:24

Has there been any further updates on this vehicles progress ?
He is doing a superb job on it

Keith Webb · #5 16-02-09, 08:35

Had a call from Lloyd this morning who has almost finished the body.

He has a need for a pattern, or photographs and measurements (or drawings) of the seat bases for the two crew seats which sit lower than the others. Lloyd says they must be on some sort of quick release to make them easily removable.

Lloyd is not on the internet but if anyone can help please post pictures or other information here and I'll print it to send to him.

Bob Moseley (RIP) · #6 16-02-09, 13:44

Hey Keefy - I asked the same question on 4 January in the Restoration Forum and re-asked on the 20th. Only response was from you to say you were looking.

Bob

Keith Webb · #7 16-02-09, 20:35

Quote:

Originally Posted by Bob Moseley

Hey Keefy - I asked the same question on 4 January in the Restoration Forum and re-asked on the 20th. Only response was from you to say you were looking.

Bob

Must be my dementia again.

Still, SURELY someone in Europe or Canada has one with original seats intact?