|
|
|
|
#1
04-09-08, 06:35
|
||||
|
||||
I was wondering how you were coming with your delivery plans. I take it the 15 cwt didn't make the trip too. I wish you luck on the restoration and let me know if I can help.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
|
#2
04-09-08, 06:53
|
|||
|
|||
|
Hello David,
No, the F15a was pushed into a coulee on the property after the farm changed hands. Going to try and do this one right, but may take some time. Thank you for all your help. Regards, David Last edited by David DeWeese; 21-04-11 at 01:40.
|
|
#3
04-09-08, 07:03
|
||||
|
||||
|
C8
David
What a gem . It is a No. 11 cab and it's in very good shape - believe me. There are a few of us on this forum with C8's . Myself, David Pope in Canada, Andrew up at Dubbo in NSW . A guy in California Dennis Deck , but he has dissapeared . Nick Bullock in Yorkshire has one too, it was measured up for the 1A2 body plans . The 1A1/2 body you need , not 1B , you will have to build a replica. The plans are available From my research, they used a civilian front 'I' beam axle from the 1940 Civilian 3 ton truck - the part numbers are same .. But they adapted the lighter brakes to the axle . The rear axle is the 1940 civilian 1 ton truck axle .. same springs , 4.55 -1 ratio. My article is here : http://www.geocities.com/vmvc1au/8cwttwins.html Glad to see you chose the GM version ... the inferior Ford version would be too difficult a job .. Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#4
04-09-08, 08:56
|
||||
|
||||
|
Congratulations David
It does look to be in pretty good order At least you are in the right country to get chevrolet parts at a reasonable price As mike has said the c8 is pretty much built around 1940 civilian components including the chassis with only a few changes here and there So for all your mechanical components it will be easy for you to source wheel spacers are rare (In Australia at least)so you may have to get some custom made if you can not locate some Good to see another one saved from the scurge scrappies  Post a few more pics .They are always good to see Look forward to seeing your progress Good Luck  (not that you need it with a chev)
__________________
Have a good one Andrew Custodian of the "Rare and Rusty" 
|
|
#5
13-10-08, 11:12
|
||||
|
||||
|
Quote:
"Dennis Deck wrote (Monday 13 Oct, 1.30am): I recently sold my 1941 Cab 12 C8 CMP to Chuck Anderson in Oregon. He is going to finish the restoration project I started many years ago."
|
|
#6
13-10-08, 18:07
|
|||
|
|||
|
I just picked it up from Dennis last week. I'm starting by rebuilding the carb and figuring out wiring & dash. Unfortunately there isn't another one locally (at least that I'm aware of), so I have nothing to look at to see how things should look.
Could I trouble a fellow C8 owner to post some pictures of the dash & how the top front of the cab mounts onto the top of the windshield? I wish I would have taken more/better pictures of the smokin' nice C8 that was a the MVPA show in Portland last August.  At the time I had no idea I was two months away from getting one.
Last edited by Chuck Anderson; 13-10-08 at 18:27.
|
|
#7
14-10-08, 08:42
|
||||
|
||||
|
I think this is what your after
Top of windshield bolts to wood panel which is screwed in along turrett face
__________________
Have a good one Andrew Custodian of the "Rare and Rusty"
Last edited by aj.lec; 14-10-08 at 09:59.
|
|
#9
14-10-08, 18:46
|
|||
|
|||
|
Thank you very much Andrew! Those are great pictures.
 I don't know what the "dip button" is, I thought someone mounted a starter button on the dash. However, looking at the wiring....I can see it is original to the vehicle. I'm missing the trim piece that goes around the top front and sides of the cab. This must be where the wood pieces are screwed onto the cab. Should the trim piece be made of canvas or metal? It almost looks like the welt material that goes under the hood (on top of the radiator shroud) on a jeep. Regards, Chuck Last edited by Chuck Anderson; 14-10-08 at 19:46.
|
 |
|
|
Hybrid Mode
