Project PHOENIX

Bob Moseley (RIP) · #1 21-01-09, 13:43

So this Saturday the plan is to re-construct the wheels and next week get the 43 tooth sprockets made. This is truly amazing as is MY MATE COLIN!!

Bob

lynx42 · #2 22-01-09, 08:33

So we WILL see you and Phoenix at Corowa then.
Rick

Bob Moseley (RIP) · #3 22-01-09, 12:42

Hi Rick - all is a go, but remember Murphy.

Bob

Keith Webb · #4 22-01-09, 21:13

Quote:

Originally Posted by Bob Moseley

Hi Rick - all is a go, but remember Murphy.

I asked Sam Kekovic to speak to Murphy and he told him to 'get stuffed' and keep away from your project so you should be OK.

Bob Carriere · #5 23-01-09, 16:06

Nice job Bob....

What is the thickness of the plate used for the track assembly....? what would be the original thickness of the side plates supporting the suspension on a UC...?

Will the frame be boxed..... or stiffened with a backing plate inside the frame.....or with additional frame cross members to hold sideway stress....?

Curious and facinated with the design.

Bob C.

Bob Moseley (RIP) · #6 24-01-09, 13:07

Hi Bob C, all credit has to go to Colin and his expertise. I'll let him answer your questions.

Bob

Bob Moseley (RIP) · #7 24-01-09, 13:57

Hi all - working bee today. Removed rest of brackets, etc. off chassis rails whilst Colin fabricated the sub-frame to hold the front track adjusting wheels. Then much drilling of holes.

Bob