|
|
#2
27-01-09, 14:38
|
||||
|
||||
towing bracket
you can't have mine
__________________
Charles Fitton Maryhill On., Canada too many carriers too many rovers not enough time. (and now a BSA...) (and now a Triumph TRW...) 
|
|
#3
28-01-09, 01:26
|
||||
|
||||
|
bracket
You can't have the one I don't have either.
__________________
Model U.C. NO-2 MK II.* SERIAL 25680 HULL 24699. LOWER HULL 24742. ENGINE TL-26707-F. C.D. 2609. BUILT MAR. 25, 1944. CT 266677 Former WASP
|
|
#4
28-01-09, 10:49
|
||||
|
||||
|
if you had one say from a pal (i dont have one) could it be pre fab'd are you wanting to tow stuff with it or is it for asthetics ? are they a cast item ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
28-01-09, 13:32
|
||||
|
||||
|
Come now, Richard, don't underrate yourself, you probably have lots of pals.
|
|
#6
28-01-09, 13:59
|
||||
|
||||
|
hehehehehe very funny
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#8
29-01-09, 23:09
|
|||
|
|||
|
Replica Stacey
Hi Adam:
Robin Craig (who occassionally posts on this forum) is a talented welder who made a replica for us (www.calnan.com/swords). As we couldn't get tapered tubing Robin used square, however, cut on a bias and welded up they sure look good! You will need to find the springs and hook from a wrecked CMP. I will try to find some photos for you so you can see for yourself.  Mike 
__________________
Mike Calnan Ubique! ("Everywhere", the sole Battle Honour of the Royal Regiment of Canadian Artillery) www.calnan.com/swords
|
|
#10
30-01-09, 09:37
|
|||
|
|||
|
Hi , For a MkII the brackets were cast, The welded ones were usually made in the UK for fitting on existing MKI carriers.
|
|
#11
30-01-09, 19:44
|
|||
|
|||
|
Army News
Hi Adam!
Good to reconnect with you. We use the 45mm all the time in various events. It has become a major favourite of our local cadets as it is light enough for them to handle. Do you still have the M151? Getting cast repros of the stacey attachment would be prohibitively expensive which is why we went the welded up replica route. As I promised, I'll dig up photos this weekend. In the interim, take a look at the following websites on "Army News": http://www.army.dnd.ca/lf/English/6_...bled=1&id=3102 http://www.army.dnd.ca/lf/English/6_1_1_1.asp?id=2124 http://www.army.dnd.ca/lf/English/6_1_1_1.asp?id=3198 Mike
__________________
Mike Calnan Ubique! ("Everywhere", the sole Battle Honour of the Royal Regiment of Canadian Artillery) www.calnan.com/swords
|
|
#12
31-01-09, 03:39
|
|||
|
|||
|
Stacy towing
I offered a guy $500 for a set off of a beeter and got no reply . I wanted to get a set to make the sand moulds for casting a bunch I am sure we could do fifty sets .Mine had them on it at one time and they must be laying in some ones junk .I have the spring and hook .I will make a set as last resort .If anyone can find a set to use for moulds that woul be great George
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
|
#13
31-01-09, 04:54
|
||||
|
||||
|
Good Coverage
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
 |
|
|
Linear Mode
