|
|
|
|
#1
15-02-09, 13:57
|
|||
|
|||
Saturdays work
Hi Guys
cleaning brake parts in preparation of making new brake lines and assemblying the complete system this week. Also drove the bren carrier which is planning a return to Corowa this year Tim Scriven 
|
|
#2
15-02-09, 22:20
|
||||
|
||||
|
Hoping to start the engine again this week on the cab 11 as it has been a while
over the weekend I found enough parts to assemble the head lights and since we are not painting the 11 I cleaned the inside of the lights and painted them with fish oil and hopefully that protects them from rusting any more our big job during last week was fitting reconditioned brake wheel cylinders to the ford 1 ton ute, greasing wheel bearings and fitting a better steering box and today we are going for a test run to make sure all adjustments are ok. not long before it heads off to be loaded ready for the trip to Europe Max
|
|
#3
17-02-09, 06:08
|
||||
|
||||
I am still working on my F30,some decking to obtain and wiring to finish.
Am also working on a c8ax cab rebuild for a fellow club member,these are what keep me busy on sunday mornings.
__________________
kenney
|
|
#4
17-02-09, 09:10
|
|||
|
|||
|
Saturdays work
Hello Everyone,
Last Saturday was spent working on the F30 bumper. It was badly bent and twisted and has sat for nearly four years waiting for the right piece of steel to come along to make a new one. This did not happen. At least now I will have an original bumper with lots of "patina". I was hoping to be able to drive the 305 km to this years NZMVCC Easter rally in Rob Beale's home town of Gisborne. Still lots to do and time is ticking away so maybe it will be by car. Regards, Terry
__________________
Terry F30 13 Cab CMP Morris Commercial C8
|
|
#5
17-02-09, 19:46
|
||||
|
||||
|
trailer restoration
For the moment i'm restoring my 20cwt trailer (composite),
but can we call it a CMP? I'll try to get it done for the meeting in Ursel (Belgium)this august....
|
|
#6
20-02-09, 04:25
|
|||
|
|||
Working on cmp
greetings from the Hinterland of Smithers BC, sat, worked on taking seats out of f15a also worked on the wt van inside shop
c15a in shed tooo cold to work on, have relined gas tanks to install A very complete original F15a Have relined gas tanks to install when it warms up bent the snow plow on my M37 hard ice, another project. anywhere in the world so this might count dennis 
|
 |
|
|
Hybrid Mode
