|
|
#25
23-02-09, 20:28
|
|||
|
|||
My humble opinion.....
....after looking closely at the various pictures..... here is was I concluded....
It is most likely a standard Ford F15a.... did not see bump on hood... It has been rather well fitted with a 2 1/2 ton Deuce box cut to fit.... The rear bumperettes and pintle tow hook are from the same above truck... Someone has installed 20 inch rims..... the break drum and rear axle are for the smaller F15a rims...... too much clearance between drum and rim.... someone also installed a 2 speed T-case.... no big sin and more pullingpower when needed. By today's standard a very complete truck to be enjoyed as is or fully restored...... owner's choice... it's "HIS" truck...... Very complete interior...... seems to have another lever on the side of the dog house engine cover on the passenger side..... possibly to operate the two speed t-case if the proper T-case tower was never installed. Terry you have a very nice truck...... enjoy it......and make sure you document everything with thousands of photograph to be enjoyed later when you forget where things fit. My 5 cents worth.... 4.05 cents US Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
|
Threaded Mode