|
|
|
|
#1
05-07-09, 21:17
|
||||
|
||||
There was a whole entier thread made not to long ago about the drawings for the carrier. There were those posted giving the outline shapes and I posted a bunch of handdrawn ones with the hole placements.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer 
|
|
#2
05-07-09, 23:42
|
||||
|
||||
|
I think that was the thread the above pics also came from, i believe they were posted up towards the end of that thread Jordan.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#3
06-07-09, 09:15
|
|||
|
|||
|
Credit where credit is due!
George McKenzie generously made these drawings available. Jordan posted them on this thread:
http://www.mapleleafup.org/forums/sh...rmour+drawings George made some comment on them too. Rob ps I hope to be doing the upper armour soon too! Last edited by Rob Beale; 09-07-09 at 08:33. Reason: spelling
|
|
#4
08-07-09, 18:08
|
|||
|
|||
|
Armor Drawings
I got these drawings from a fellow in France .He is an engineer. We have made one set of armor with them and it turnd out good . I will have to cut two more sets .A MK1 & MK2 to complete my carriers .It would be great if someone could put the drawings on a card for CNC .
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
|
#5
09-07-09, 17:47
|
||||
|
||||
|
leave it with me lads, i will get my finger out and sort it. i wanted engineers card templates done but struggled to get them over here i asked for some patterns from a pal but nothing came of it, i ask this only to be thorough last thing i want is to create CNC programe that cuts out a lovely shape in an expensive peice of 10mm steel only for it to be wrong.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#6
10-07-09, 19:38
|
||||
|
||||
|
can i ask out of curiosity how many people require outer armour ? reason i ask is i may be able to job lot a load, (it will cost slightly less for all to do this)
those from canada could share a couple of pallets to save postage, and those nearer to me could either courier the cut sheets or collect. let me know guys. Rich
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#7
12-07-09, 20:28
|
||||
|
||||
|
Right i got most of the outer stuff CAD'd but need the center bulkhead and glacis plate drawings (as these tend to get chopped up too) all dimensions in MM would be prefered for my programe.
the only other issue i got is the front armour has not got the viewing ports plotted which i need to address, especially if folk are to get the plates CNC'd cheers Rich
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
|
|
Hybrid Mode
