|
|
#21
06-07-09, 20:18
|
||||
|
||||
more on the restoration
Now the rear axle is ready, the rear springs are next on the workbends. I took them apart and cleaned all the rust of and primed them. I also did all the braces and bolts to bolt the springs and the axle together. I tested the front and rear shocks if they work properly and then gave them the same workover as every thing else. so now I am a little bit closer to putting together the axles and frame but first some 
__________________
1940 chev C15 cab11, MCC wirelessbody No1 MK3.  
|
|
|
Threaded Mode