Armor CAD Drawings

[RichardT10829]

leave it with me lads, i will get my finger out and sort it. i wanted engineers card templates done but struggled to get them over here i asked for some patterns from a pal but nothing came of it, i ask this only to be thorough last thing i want is to create CNC programe that cuts out a lovely shape in an expensive peice of 10mm steel only for it to be wrong.

[RichardT10829]

can i ask out of curiosity how many people require outer armour ? reason i ask is i may be able to job lot a load, (it will cost slightly less for all to do this)

those from canada could share a couple of pallets to save postage, and those nearer to me could either courier the cut sheets or collect.

let me know guys.

Rich

[RichardT10829]

Right i got most of the outer stuff CAD'd but need the center bulkhead and glacis plate drawings (as these tend to get chopped up too) all dimensions in MM would be prefered for my programe.

the only other issue i got is the front armour has not got the viewing ports plotted which i need to address, especially if folk are to get the plates CNC'd

cheers

Rich

[shaun]

hi folks,
To me it seems that you are trying to reinvent the wheel - martyn tasker has just done a fantastic job with his new armour. i know his fabricator produced CNC plans and they can chop out new pannels till the cows come home (in fact most parts). any pannel you need for MK1 or MK2 or welded hull. I know they will not part with the drawing (i have already asked) but Martyn would ship anything these guys produce. there turn around is great not the months of waiting like other but on your door step in a few weeks. I order some parts for my Bren and they were here in 3 weeks. Yes Martyn is a mate of mine but the fabricator aint. fianaly carrier owners have a supplier of parts like jeep owners have had for years.

try them - speed your project up.
shaun

1938 bren carrier
1944 universal carrier no2 mk2* (puddle jumper)
1943 welded hull carrier
1944 universal carrier no2 mk2
1942 daimler AC
1940 hilman tilly
1943 bedford oy

[George McKenzie]

I was thinking that would it not be possible to get coppies of the CNC program of the armor for the fellows in Canada and other parts of the world .I hate to think of what the freight would be to ship the armor .I live 3000 miles from some of the fellows in eastern Canada .I have counted over 30 carriers in Alberta alone that don't have armor. Richard, my MK2 has the original front armor and center bulk head .But I wonder how accurate a measurement I can get with it in the carrier .

[RichardT10829]

Shaun i appreciate where you are coming from, i cant recall the exact figure for getting some made by the firm but it was well into four zero's...i cant afford to throw money away like that, especially when i would need the materials freighted up North too.

i have access to all the machines i need to make a set at a cost i can afford i only require acurate dimensions and reference to what size hole, which are counter sunk etc etc etc.

perhaps if the firm were to give a discount on a set at a reasonable cost i would reconsider my options but thousands for mild steel does not compute in my tiny Geordie mind......i am too close to scotland and by reputation they are froogle with their cash hehehehehe

[martyn]

Hi the firm i used to make my armour did quote a four figure sum but that was for the frames and ALL the top armour not just the front when you start to look in to how much work went in to the parts its not as simple as stright cut plates. i wish you all the best in making your armour and trying to put it on CAD but you carnt beat an original patten to work from like we used.
For those of you who have purchased a carrier in the condition shown in the attached photo i would think unless you are a compleete lucky GIT (richard lol ) you would be talking four zeros not including shipping thats only half a carrier the tops what makes it look like a carrier then you have the cost of rivetting, carriers are not a cheep toy like people think oh its only a box on tracks how easy would that be to make? I can tell you all i have spent well over 15k on having all the linkages and bits and armour made and thats not included in the purchase of the vehicle and then i was mad enough to make a new one on top of building this one that alone cost just as much to do. i wish you all the best with your builds just sorry i carnt help with the pattens my fabrication firm works on £30 ph and cost +20% you do the maths and tell me if thats too much to pay for parts when you see the finshed item ?