Pesky Bolt

[hrpearce]

After using spray oil I gripped the spacer with a pipe wrench then used a rattle gun on the bolt to shake the rust off. I had to file the wrench marks off the spacer and I used a round file in a drill to ream the spacer out slightly before reassembly.

[Ausmick]

How did you go with your 'pesky' bolt Gary?

Got home early today and attacked mine. Hit it with a centre punch then drilled a pilot hole. Next was a bigger drill and tapped it out with a punch.

Another pain of a project out of the way! Hope you had luck with yours....