Richie's Mk1 Restoration

RichardT10829 Richie's Canadian Mk1... 07-06-09, 11:09

Philliphastings Nice pics 08-06-09, 05:41

Lynn Eades Posting Pictures 08-06-09, 08:24

RichardT10829 couple of queries i have. one... 08-06-09, 10:18

shaun Hi Richie, Glad the wagon go... 08-06-09, 21:08

rob love 10131 is a normal hull serial... 08-06-09, 22:03

RichardT10829 Rob, am i reading the lists... 09-06-09, 19:37

rob love I do not have Nigel's book,... 09-06-09, 21:57

RichardT10829 Well Sunday the rear axel... 12-06-09, 16:36

Jordan Baker Your is for sure a Mk1. You... 12-06-09, 17:26

RichardT10829 yeah, that and the battery... 12-06-09, 19:50

rob love Yes it can...the procedure is... 12-06-09, 20:08

RichardT10829 hahhaha, excelent will give... 12-06-09, 21:05

RichardT10829 well managed to get the... 14-06-09, 11:09

Lynn Eades Richard 14-06-09, 11:51

shaun Hi Richie, The nuts were... 14-06-09, 13:55

RichardT10829 sure will. i have a photo in... 14-06-09, 18:06

RichardT10829 Right managed to get the... 14-06-09, 22:27

kevin powles holes, round ones not ones... 14-06-09, 23:43

Lynn Eades Richard 15-06-09, 08:46

RichardT10829 awesome. cheers for the... 15-06-09, 09:41

RichardT10829 well managed to get most of... 20-06-09, 13:51

RichardT10829 well a bit more done, just... 28-06-09, 22:12

Lynn Eades Richard 28-06-09, 22:39

RichardT10829 cheers Lynn. the number i can... 28-06-09, 22:49

Lynn Eades Hi Richard 28-06-09, 23:27

RichardT10829 thanks Lynn, will give it a... 29-06-09, 07:57

RichardT10829 right, i managed to get the... 30-06-09, 22:44

RichardT10829 well the plate has gone to... 05-07-09, 11:35

Tony Smith Use the enter key so that... 05-07-09, 15:06

kevin powles fenders. 05-07-09, 18:11

RichardT10829 cheers for that. all advice... 05-07-09, 19:56

horsa The T-16 fenders aren't as... 05-07-09, 23:59

RichardT10829 Cheers David, just hope she... 06-07-09, 09:10

RichardT10829 Eureeka. got the hub off it... 11-07-09, 16:39

RichardT10829 thought i would pop a few... 18-07-09, 15:58

Lynn Eades Richie 18-07-09, 23:50

RichardT10829 thanks for the nice comments.... 19-07-09, 17:14

RichardT10829 Right guys its crunch time,... 04-08-09, 09:51

martyn bulkhead......... 05-08-09, 01:11

RichardT10829 well managed to secure a pair... 24-09-09, 20:02

George McKenzie I was cleaning out the dirt... 17-10-09, 06:52

RichardT10829 yes if its the bakolight one... 17-10-09, 11:21

malcolm erik bogaert richards carrier 17-10-09, 20:26

George McKenzie Thank's for the reply . Mine... 18-10-09, 04:37

RichardT10829 I replied to your email... 18-10-09, 15:53

George McKenzie http://IMGP1683 jpg This is... 21-10-09, 05:31

RichardT10829 i noticed that it was... 21-10-09, 10:39

George McKenzie Would you post the oicture... 21-10-09, 16:43

RichardT10829 wel SMV team came back with... 06-11-09, 18:18

RichardT10829 well i am plodding along... 21-11-09, 21:32

George McKenzie Richie's MK1 22-11-09, 04:22

RichardT10829 The engine is not the... 22-11-09, 10:26

RichardT10829 yes i cant wait myself ! i... 09-12-09, 15:33

RichardT10829 well utterly depressed i... 21-12-09, 18:28

Stew Robertson Just a little hint on your... 30-11-11, 00:07

kevin powles Rich, Is that a Golf trolley... 31-12-13, 13:15

RichardT10829 Nah buddy it's my chainsaw...... 31-12-13, 14:01

RichardT10829 Anyone got a valve seat... 31-12-13, 23:45

Lynn Eades So what do you own a chainsaw... 01-01-14, 04:21

RichardT10829 One tree left Lynn, the rest... 01-01-14, 10:23

RichardT10829 Well I finished rebuilding... 01-01-14, 22:21

shaun Well I don't know ! You give... 01-01-14, 22:41

RichardT10829 Not moaning about your bits... 01-01-14, 22:47

shaun I know mate , just winding... 01-01-14, 22:58

shaun I have a civiy car book on... 01-01-14, 23:00

RichardT10829 Hahahahaha. Yes please matey.... 02-01-14, 10:41

Lynn Eades The Brit carrier Chilwell... 02-01-14, 11:59

Andy Mitchell flatheads 02-01-14, 15:55

RichardT10829 Cheers Andy + Lynn I have... 02-01-14, 19:22

George McKenzie Richies MK1 03-01-14, 18:10

shaun Richie I have found the carb... 03-01-14, 21:12

RichardT10829 cheers matey. Nordian... 04-01-14, 00:28

RichardT10829 Bit more done yesterday, rear... 05-01-14, 16:01

RichardT10829 Well engine work continues at... 29-01-14, 09:54

David Dunlop Richard. Not sure if this... 29-01-14, 17:10

Ben Hi Richie I was at Royal... 29-01-14, 20:46

RichardT10829 I was on the phone to him... 29-01-14, 21:58

RichardT10829 Ben are you running a centre... 29-01-14, 22:30

Ben I'll post some pics tomorrow.... 29-01-14, 23:03

shaun Do you need a crank Richie ? 30-01-14, 00:27

RichardT10829 Shaun, the machine shop is... 30-01-14, 09:07

Ben It could be worse Rich. If it... 30-01-14, 09:11

Lynn Eades Rich, why do you ask about a... 30-01-14, 11:53

RichardT10829 Because from building other... 30-01-14, 13:18

Ben No centre strap as far as I'm... 30-01-14, 13:53

RichardT10829 Nice, electronic ignition ?... 30-01-14, 14:04

Lynn Eades Richard, I would understand... 30-01-14, 14:32

Michael R. You would not be reving the... 30-01-14, 14:50

Ben Electric but hidden in a crab... 30-01-14, 14:58

RichardT10829 Yeah will do... It's a... 30-01-14, 16:24

Ben I thought this was a bit of... 30-01-14, 16:49

RichardT10829 That's exactly what mine is... 30-01-14, 17:03

Ben Grey but three Brodie Helmets... 30-01-14, 18:01

RichardT10829 Yeah for sure.... Huge... 03-02-14, 21:54

Lynn Eades Rich, that could be a factory... 04-02-14, 01:24

RichardT10829 Work presses on at an... 24-02-14, 13:52

lssah2025 Very nice looking project,... 24-02-14, 14:31

RichardT10829 Yes, best contact the guy... 24-02-14, 14:59

super dave Just a side note when using... 25-02-14, 01:57

RichardT10829 Yeah cheers for that Dave it... 25-02-14, 09:36

Marc van Aalderen An easier option is to use an... 25-02-14, 19:13

RichardT10829 I have a strop on a block and... 26-02-14, 10:19

RichardT10829 Well work continues, the... 06-03-14, 13:33

Lynn Eades Richard the rods are medium... 06-03-14, 13:57

RichardT10829 Cheers Lynn, yes the trigger... 06-03-14, 14:12

Lynn Eades I think the big lumberjack's... 06-03-14, 14:24

Dave Schindel The shift lever in my MKII... 06-03-14, 15:37

RichardT10829 The step in the stick is... 06-03-14, 22:26

charlie fitton S0..... 07-03-14, 00:59

shaun The molasses tank is a great... 07-03-14, 08:17

RichardT10829 I got the mix to work to this... 07-03-14, 08:23

RichardT10829 Well got a call from machine... 07-03-14, 17:52

eddy8men sorry mate can't let you have... 07-03-14, 19:36

RichardT10829 Doe ! :doh: :bang: :bang:... 07-03-14, 21:48

RichardT10829 Bit more progress on the... 18-03-14, 22:54

RichardT10829 Can only seem to add one pic... 18-03-14, 22:59

RichardT10829 And here is the last one for... 18-03-14, 23:00

Marc van Aalderen Richie, Now would be a... 18-03-14, 23:06

RichardT10829 Pulley is still lying in the... 18-03-14, 23:14

Marc van Aalderen Yes, but you can't see the... 18-03-14, 23:21

RichardT10829 Gotcha..... Never thought... 18-03-14, 23:25

Marc van Aalderen Glad to be of help. That's... 18-03-14, 23:31

RichardT10829 A bit progress.... Engine is... 03-04-14, 13:46

Petr Brezina Very nice :thup: 03-04-14, 14:52

RichardT10829 Well the engine is off the... 04-04-14, 21:46

horsa You need a bigger hammer :D... 04-04-14, 22:16

RichardT10829 No the original was the... 04-04-14, 22:45

chris vickery Ritchie, nothing wrong with... 04-04-14, 22:46

chris vickery Only bit of bad news Richie... 04-04-14, 23:05

RichardT10829 Cheers Chris, I will give... 04-04-14, 23:34

Private_collector Distributor swaps 05-04-14, 00:04

chris vickery Wow Tony, cheaper down in Oz.... 05-04-14, 00:40

RichardT10829 Thanks guys, the great people... 05-04-14, 09:35

lynx42 [QUOTE=RichardT10829;193932]We... 06-04-14, 13:53

Lynn Eades Two pictures to show the HT... 06-04-14, 15:07

RichardT10829 Thanks Lynn, I have just... 06-04-14, 20:50

RichardT10829 Well, still waiting for the... 13-04-14, 21:50

RichardT10829 Well got a bit more done... 15-04-14, 23:02

Lynn Eades Hi Rich. I recon I almost... 16-04-14, 09:06

RichardT10829 Thanks, I had hand painted... 16-04-14, 09:14

kevin powles Looking good Richie, remember... 16-04-14, 10:57

Lynn Eades Kevin, In the nicest possible... 16-04-14, 11:41

chris vickery Ritchie, no need to worry... 16-04-14, 12:15

RichardT10829 Points well made :-) Yes... 16-04-14, 18:04

RichardT10829 I am going round in circles... 26-04-14, 21:53

chris vickery Richard, is that an original... 26-04-14, 23:14

Richard Farrant In Tony's post #461 he shows... 26-04-14, 23:29

RichardT10829 I thought the adaptor plate... 27-04-14, 00:20

Andrew Rowe Camshaft Lengths 27-04-14, 00:36

chris vickery Richard The adapter plate is... 27-04-14, 01:09

chris vickery I just confirmed that 32-41... 27-04-14, 01:20

Lynn Eades engine oil for flatties 27-04-14, 01:30

Richard Farrant Lynn, The oil manufacturers... 27-04-14, 01:52

chris vickery I assume Richard that you... 27-04-14, 01:54

RichardT10829 Thanks folks, I got an email... 27-04-14, 08:53

bigbryan zinc oil 27-04-14, 09:01

Lynn Eades Hi Big Bryan! good to see you... 27-04-14, 10:34

RichardT10829 Well spacer on order, cam... 27-04-14, 20:53

chris vickery I assume Ruchard that you did... 27-04-14, 21:49

RichardT10829 Yeah Chris I give it a good... 27-04-14, 21:51

hrpearce Richard it is amazing how... 27-04-14, 22:47

Michael R. YouTube vid posted in the... 27-04-14, 22:58

RichardT10829 Total technophobe matey, just... 27-04-14, 23:47

bigbryan Hi Lynn, Yep , its... 28-04-14, 13:45

RichardT10829 Little update, the adaptor... 08-05-14, 22:07

Richard Farrant How have you wired the... 08-05-14, 22:15

RichardT10829 The red and black from the... 08-05-14, 22:21

hrpearce I don't think you should have... 08-05-14, 22:29

RichardT10829 I have tried with and without... 08-05-14, 22:39

hrpearce I just google imaged ignition... 08-05-14, 22:50

RichardT10829 Like I say I tried with and... 08-05-14, 23:08

Richard Farrant Hi Richard and Rob, ... 08-05-14, 23:34

motto Yes, you must have the... 09-05-14, 07:00

RichardT10829 Spoken with the shop, the kit... 09-05-14, 11:43

RichardT10829 Right.... Re did all the... 09-05-14, 12:30

RichardT10829 Well the ignition system came... 14-05-14, 15:30

shaun That great news Richie ! Now... 14-05-14, 22:32

Ben :) well done mate. Looking... 14-05-14, 22:33

Lynn Eades Great stuff! Classic sound! 15-05-14, 00:30

RichardT10829 Just a quick question.... Do... 16-05-14, 22:03

Ben The weight of the engine in... 16-05-14, 22:27

kevin powles Rich, tracks go on last, you... 16-05-14, 22:41

RichardT10829 Busy afternoon was had today... 18-05-14, 21:37

RichardT10829 Well as time draws nearer... 21-05-14, 23:06

Dave Schindel nice riveting job by the... 21-05-14, 23:59

Lynn Eades You're going well Rich. Can... 22-05-14, 00:52

shaun Lynn my Feb 1943 Canadian MK... 22-05-14, 22:41

Jordan Baker Euan is correct. Your clutch... 22-05-14, 04:25

Michael R. A simple error to make as the... 22-05-14, 04:40

Ben Looking good Richie. It's... 22-05-14, 08:27

RichardT10829 I wouldn't care I had it the... 22-05-14, 09:40

RichardT10829 Yeah, Lynn, the seat back... 22-05-14, 10:19

Lynn Eades I'm waiting for Michael R. to... 22-05-14, 13:29

Ben From my understanding all... 22-05-14, 15:51

Michael R. There are very few examples... 22-05-14, 19:24

RichardT10829 As Per Michael R's comment on... 22-05-14, 20:55

shaun Richie ...... I'm in Norfolk... 22-05-14, 22:43

RichardT10829 Yer all the same soon there... 22-05-14, 23:42

eddy8men looking good mate. when... 23-05-14, 01:36

tankbarrell You must stand out... 23-05-14, 08:53

shaun Yes Adrain , none of my six... 23-05-14, 09:52

Rob Beale Seat back fittings 23-05-14, 09:58

Lynn Eades Rob, have you ever seen that... 23-05-14, 12:18

Michael R. With Rob's lower hull 4200... 23-05-14, 19:52

Rob Beale A pic is worth lots of... 23-05-14, 23:53

Lynn Eades Rob, see my above post. I... 24-05-14, 00:26

Michael R. Robin, re bulkhead: e-mail... 24-05-14, 01:10

The Bedford Boys Daves carrier is a Sentinel... 24-05-14, 06:27

RichardT10829 Well I have started to feed... 24-05-14, 22:02

Ben I'll have a look at my curved... 24-05-14, 22:14

shaun Bring your camara later this... 24-05-14, 22:25

kevin powles Front firing rest bracket. 24-05-14, 22:29

RichardT10829 No it never came....... 24-05-14, 23:03

kevin powles Will check the shed, I... 25-05-14, 00:26

RichardT10829 Cheers buddy 25-05-14, 08:21

kevin powles Mount 25-05-14, 09:36

RichardT10829 Yes please thanks 25-05-14, 14:51

Lynn Eades Rich, what have you learned... 25-05-14, 15:31

RichardT10829 I have the correct curve, and... 25-05-14, 15:55

Lynn Eades Rich, I think there is a... 26-05-14, 00:17

Michael R. Plate-engine ventilator... 26-05-14, 03:45

kevin powles Pictures 26-05-14, 10:17

Lynn Eades Thanks Michael. Very helpful... 26-05-14, 11:31

RichardT10829 Yep, cheers guys that helps... 26-05-14, 14:14

kevin powles That dimension might be 1/4"... 26-05-14, 15:30

RichardT10829 Cheers guys ! Hopefully I... 28-05-14, 10:29

Lynn Eades Do you know someone with a... 28-05-14, 10:53

Ben A sealed plastic boat tank... 28-05-14, 11:26

RichardT10829 Cheers, I have the straps and... 28-05-14, 16:29

Jordan Baker Those same turnbuckles are... 28-05-14, 20:01

RichardT10829 Well it's been a while since... 13-06-14, 19:15

eddy8men not too shabby mate, not too... 13-06-14, 20:12

Ben Well done, keep up the... 13-06-14, 20:32

RichardT10829 Will do mate..... The... 15-06-14, 21:17

kevin powles Rich, Don't forget if the... 15-06-14, 22:12

RichardT10829 Cheers guys.... Would be nice... 15-06-14, 22:20

Andy Mitchell Definitely looking good... 16-06-14, 10:54

RichardT10829 http://img.photobucket.com/alb... 22-06-14, 22:02

eddy8men show off :note: 22-06-14, 22:55

ajmac That's good Richie, sounds... 22-06-14, 23:07

RichardT10829 North Africa into Sicily 22-06-14, 23:19

RichardT10829 Well the past two weeks have... 25-06-14, 22:45

kevin powles Rich, You have certainly... 25-06-14, 22:55

Richard Farrant Hi Richard, looking good,... 25-06-14, 23:11

RichardT10829 Engine was in before tracks... 25-06-14, 23:35

Richard Farrant Oh well, only an idea :doh: 25-06-14, 23:49

RichardT10829 Managed to fit my repro... 29-06-14, 10:36

RichardT10829 Quick update, the carrier... 01-07-14, 00:12

chris vickery Richard, kudos to you on some... 01-07-14, 00:28

RichardT10829 Thanks Chris... I will hold... 01-07-14, 00:34

chris vickery Richard, I have found that... 01-07-14, 00:55

kevin powles Suberb 01-07-14, 01:57

chris vickery I love the British jargon... 01-07-14, 02:02

Ben Well done Richie Looking... 01-07-14, 18:39

RichardT10829 It does, it does ! 01-07-14, 19:25

eddy8men see you in the arena for the... 01-07-14, 20:02

RichardT10829 Well, had an 8 mile round... 02-07-14, 22:16

Richard Farrant Richard, There is enough... 02-07-14, 22:44

kevin powles Richard F, depends what's... 02-07-14, 22:52

Richard Farrant In service they would more... 02-07-14, 23:00

kevin powles Richie 02-07-14, 22:44

RichardT10829 Yeah no time to machine until... 02-07-14, 22:52

RichardT10829 You don't weld the liners in... 02-07-14, 22:54

kevin powles Rich, I managed to pick up a... 02-07-14, 23:11

kevin powles Rich, did you get that '****... 02-07-14, 22:56

Richard Farrant :doh: :) 02-07-14, 23:03

shaun Richie , you'd can't weld... 02-07-14, 23:10

RichardT10829 Shaun, no no mate it is as... 02-07-14, 23:15

Lynn Eades If you take the drum to a... 03-07-14, 00:32

Michael R. Why was one shoe worn? ... 03-07-14, 02:19

RichardT10829 One adjuster had stuck so one... 03-07-14, 09:09

RichardT10829 Does anyone have a datum ref... 03-07-14, 14:47

rob love Brake lining dimensions are... 03-07-14, 15:34

Lynn Eades Rich. theres no spec in my... 03-07-14, 15:35

RichardT10829 Cheers guys, just at work... 03-07-14, 15:44

Lynn Eades Rich. be aware that when I... 04-07-14, 00:29

Richard Farrant The drum inside diameter is... 04-07-14, 00:48

chris vickery One website I visited... 04-07-14, 01:08

Ben What Richard said. They were... 04-07-14, 16:35

RichardT10829 how did you hand fettle them... 04-07-14, 16:46

Richard Farrant You've got the picture !... 04-07-14, 20:13

RichardT10829 Well had a busy day at work,... 05-07-14, 21:40

RichardT10829 Right drum:-... 05-07-14, 21:45

RichardT10829 If the drums start at 14"... 05-07-14, 22:13

Richard Farrant The Canadian manual UC-F1... 05-07-14, 22:36

RichardT10829 The bearings are all good,... 05-07-14, 22:51

kevin powles Rich, your drums look quite... 05-07-14, 23:02

RichardT10829 Cheers Kev. And there was... 05-07-14, 23:06

Lynn Eades Richard F. has it right. The... 06-07-14, 02:55

eddy8men rich you could just put the... 06-07-14, 11:37

Lynn Eades Rick, the shoes are not the... 06-07-14, 11:41

eddy8men ajmac might know, I have a... 06-07-14, 11:46

RichardT10829 Well it's do or die for me,... 06-07-14, 14:10

Lynn Eades Each step carefully after the... 06-07-14, 14:57

RichardT10829 Exhaust cans completed and... 06-07-14, 18:22

eddy8men rich i'll bring my engine... 06-07-14, 22:33

RichardT10829 Cheers, Shaun is going to try... 06-07-14, 22:43

eddy8men lol tell him not to bother,... 07-07-14, 00:30

Marc van Aalderen As the fan is sucking in all... 07-07-14, 20:14

Hanno Spoelstra Hello Richie, Excellent... 07-07-14, 22:41

RichardT10829 Hanno, I know, I know but I... 07-07-14, 22:52

RichardT10829 Well I have the shoes back... 08-07-14, 17:08

RichardT10829 And the hubs came back too...... 08-07-14, 21:10

Richard Farrant Rich, If you get the shoes... 08-07-14, 21:23

RichardT10829 The nearside drum is on but... 08-07-14, 21:38

Richard Farrant Make sure the nuts holding... 08-07-14, 22:28

RichardT10829 They are loose Rich, expander... 08-07-14, 22:36

RichardT10829 Brakes back on ! Had to shape... 09-07-14, 22:48

hrpearce Good work Richard, now relax... 09-07-14, 23:03

kevin powles Chill. 09-07-14, 23:11

RichardT10829 She should be good to go now,... 09-07-14, 23:26

chris vickery Boiler suit, you must mean... 10-07-14, 00:49

RichardT10829 Yeah.... But I did boil... 10-07-14, 07:53

kevin powles Rich, run the carrier with... 10-07-14, 08:44

Lynn Eades Rich, you aren't going to bed... 10-07-14, 11:01

RichardT10829 Yeah I know... Didn't feel... 10-07-14, 11:44

kevin powles Yes but it's a step in the... 10-07-14, 12:09

RichardT10829 Taking the Mick Kev ;-) I... 10-07-14, 14:53

Andy Mitchell Got and idea for bedding your... 10-07-14, 18:12

kevin powles Italian campaign 10-07-14, 18:47

RichardT10829 I had an idea about a boat... 10-07-14, 22:46

RichardT10829 Well carrier is loaded and... 11-07-14, 18:38

Dave Schindel beer,don't forget the beer. 11-07-14, 20:15

RichardT10829 Well got the carrier back... 28-07-14, 15:08

Ben I've only cleaned mine. True... 28-07-14, 16:49

RichardT10829 Yes please matey that would... 28-07-14, 17:01

Rob Beale Well done Ritchie! 28-07-14, 21:52

RichardT10829 Since you, Lynn, kiwi Shaun... 29-07-14, 00:44

Lynn Eades Such a big job, that pump... 29-07-14, 12:47

RichardT10829 Deffo required four blokes to... 29-07-14, 14:22

Andy Mitchell Always best to have plenty of... 29-07-14, 15:02

Euan McDonald clutch rod 22-05-14, 04:03

Hanno Spoelstra Richard, What you do is... 05-07-09, 17:23

Nigel Watson Serial Numbers 22-12-09, 00:17

RichardT10829 ITS FINNISHED !!!! ... 22-12-09, 13:22

RichardT10829 just a quick and very brief... 10-01-10, 20:49

George McKenzie Rivets in North America... 11-01-10, 01:47

RichardT10829 excelent, i had a few emails... 11-01-10, 10:48

kevin powles Hi Richard, I will post a... 11-01-10, 11:08

RichardT10829 am i right in thinking then... 11-01-10, 11:13

RichardT10829 kevin your package arrived... 11-01-10, 14:00

kevin powles Richard, just checked my mk1... 11-01-10, 20:38

RichardT10829 cheers Kevin, rear fenders... 12-01-10, 11:18

kevin powles hi, sorry I havent got a trip... 12-01-10, 11:38

martyn Rivetting 13-01-10, 23:44

RichardT10829 gerat stuff Martyn... Kevin... 14-01-10, 11:56

martyn Hi mate you will just have to... 14-01-10, 20:46

RichardT10829 any special reg that i nede... 02-02-10, 15:15

Ron Pier I used an Acetylene cutting... 03-02-10, 10:00

Lynn Eades Hi Richard. 03-02-10, 11:50

RichardT10829 did not have a blower matey.... 04-02-10, 20:41

RichardT10829 christ i need a new keyboard... 12-02-10, 18:36

martyn Hi mate iam off to collect my... 13-02-10, 00:27

More replies below current depth...

marcel Richie' MK1 09-04-11, 01:43

RichardT10829 Thanks Marcel it is really a... 09-04-11, 08:01

eddy8men good on yer mate, looking... 09-04-11, 10:40

George McKenzie Richie's MK1 Restoration 09-04-11, 17:16

More replies below current depth...