|
|
#11
04-03-10, 03:12
|
||||
|
||||
I have an original top hoop and it has those pins welded in (see picture) and a wire in the cross hole. What would they be for? The pins go through a hole in the pipe and are welded on the outside end. They only list one kind of hoop in the parts manual so they must all be like that. I attached the relevant part of the parts list and it mentions upper and lower rubber straps so maybe they have something to do with the top straps.
There's also a strap and buckle assembly for the front hoopstick which I assume would be used to tie the three hoops together when the hoops are stored at the front of the box. The parts list says the AAAT doesn't use the hoops but I came across a picture with the front two in place with the Motley seat mounted at the rear of the box. I can see where you might want to keep stuff dry. This was in Europe.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
|
|
Threaded Mode