Need info on M38A1 Radio Tray Support Bracket 5820-21-847-3343

rob love · #1 12-03-10, 13:57

I'll be home in a couple of months and should be able to scrape another one up. PM me sometime in May.

Scott Bentley · #2 12-03-10, 16:04

Ralph at Niagara Military Vehicle Parts has these as well.

IIRC, he sold me mine for $25 each plus postage.

Scotty

oldlithgow · #3 13-03-10, 00:50

I phoned Ralph at Niagara Military Parts no luck there ,thanks.

Craig Harris
bbobbijo@telusplanet.net

Jon Skagfeld · #4 13-03-10, 00:57

So there's at least two of us depending on Rob to find us one each of these trays.

Rob...gentle reminder to follow in May.

Have a good one!

rob love · #5 13-03-10, 02:47

Quote:

Originally Posted by Jon Skagfeld

So there's at least two of us depending on Rob to find us one each of these trays.

Rob...gentle reminder to follow in May.

Have a good one!

Jon
I believe yours is already out in the shed waiting for me to get home and mail it. I can get more.

Scott Bentley · #6 13-03-10, 01:04

Quote:

Originally Posted by oldlithgow

I phoned Ralph at Niagara Military Parts no luck there ,thanks.

Craig Harris
bbobbijo@telusplanet.net

If your hard up for one, mine are currently out of my M151A2.

I can snap some pics with the ruler laid on it.

Scotty

Scott Bentley · #7 13-03-10, 01:27

I suppose it wouldn't be too hard to copy one with a sturdily mounted metal brake. The alternative would be to just weld something up instead of bending the metal. That was my alternate plan if I failed to find these.

I appologise for the quality of the pics. I've gotten lazy having this iPhone camera now.

Approx 1-1/4" thick, approx 3/16" thick metal.

17" Across from mounting hole to mounting hole:

13-1/4" Deep

3-1/2" Between Mounting Holes

If there is anything else, please feel free.

Scotty

oldlithgow · #8 13-03-10, 04:29

Quote:

Originally Posted by armybuck041

I suppose it wouldn't be too hard to copy one with a sturdily mounted metal brake. The alternative would be to just weld something up instead of bending the metal. That was my alternate plan if I failed to find these.

I appologise for the quality of the pics. I've gotten lazy having this iPhone camera now.

Approx 1-1/4" thick, approx 3/16" thick metal.

17" Across from mounting hole to mounting hole:

13-1/4" Deep

3-1/2" Between Mounting Holes

If there is anything else, please feel free.

Scotty

Thanks for the pics. Ya it would be tough to bend one up, but it gives me a good look at it.

maple_leaf_eh · #9 13-03-10, 05:09

The top plate and the bottom plate aren't the problem. It is the donut (or doughnut, if you prefer) cushioning in between them.

oldlithgow · #10 13-03-10, 04:22

Quote:

Originally Posted by rob love

I'll be home in a couple of months and should be able to scrape another one up. PM me sometime in May.

I will keep looking but if you can get one I would like it. Talk to you in May.