![]() |
|
|
|
#1
|
|||
|
|||
|
Hi Terry
You may have a Civvy 2 gal. can..... real flimsies where 4 gal. and squareish. The picture you refer to of the British rectangular can is similar to Cdn ones.... except.... CDN have a recessed lid and the Brits has a smooth tops with no raised edges.... You might still have a valuable gas can...... Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
|
#2
|
||||
|
||||
|
Those pictures are of the fairly common 2 gall petrol/oil/water can. The Canadian version would also have the maple leaf with a C round it embosed on the bottom.
The 4 gallon Flimsey is as stated and a very rare item. A poor quality, more or less throw away can, which was replaced from about 1942 with the captured Jerry Can design. Ron |
|
#3
|
|||
|
|||
|
Hi All
The term flimsey or flimsy is kicked around from time to time referred to as 4 gallon in Commonwealth parlance which would be Imperial Gallons. In US speak it would be a 5 gallon can, Conversion is 5 US gallons = 4.16 Imperial Gallons. I don’t know if they were one in the same cans or not. In the US oil was often sold in this style can up until the advent of plastic containers. I have several of these and yes the are FLIMSY as defined 1. not strong – weak and too easily broken 2. easily torn- light, thin and easily torn these cans are all of that. So take a look at the picture is this the Critter or not?
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
|
#4
|
|||
|
|||
|
Hi Phil,
I do not think what you have is a flimsy as it has a fixed handle, see: http://www.goatpark.force9.co.uk/ass...uelcansbrt.jpg is likely a US oil or kerosene tin. Cheers, Dave |
|
#5
|
|||
|
|||
|
Quote:
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
|
#6
|
|||
|
|||
|
Hi Dave
Yes you are correct about the origin of the can in the picture it came with hydraulic oil for a big ram. My point which your picture bears out is a true flimsy is really flimsy made from tin no thicker than what is used in tin cans. The little two gallon cans (left) are made out of much heavier steel. At least the two that came in the kit of my HUP are. I was trying to illustrate as your photo does better the range of containers. Are the containers in the photos ones you have? Because I would be curious if the two middle ones are same capacity (just different shapes) and are they made from the really light gauge steel. I also suspect that the flimsy as used by the military may have gotten heavier as the leakage problem became more evident. I have seen one of these dropped from the tail gate of a normal pickup slit open. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
|
#7
|
|||
|
|||
|
Hi Phil,
unfortunately not my collection just an image I found on the web. There is another set of images, which I couldn't find, that show actual flimsies still in their crates out in the desert. The later pattern were similar to kerosene tins we had when I was a kid, same wire handle but different cap. Still fairly weak compared to the two gallon tin; you could actually bean someone with those. Don't throw it away, though, as you could still use it as a prop at a show. Cheers, Dave |
|
#8
|
|||
|
|||
|
Hi Dave
No I won't throw it away actually what I'm doing is collecting them and 5 gallon Jerry Cans I'd like to get enough of them so that I can make up a dummy load for my Pattern 12 cargo. Given that they are trying to ban them from being used or carried on vehicles figure should make for some fun. I think a CMP Pattern 12 would look real good in a parade with a row of those or Jerry Cans sticking about the sides. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
|
#9
|
|||
|
|||
|
Quote:
When I get done my Easter Weekend chores (and it is a beautiful spring day outside too), I'll figure out how to post pictures. Yours has a screw cap and is taller than mine. The cap is much heavier with 4 prongs for some kind of wrench, not unlike the bung on a 55-gallon drum.
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
![]() |
|
|