|
|
|
|
#2
29-08-16, 12:17
|
|||
|
|||
Hi all, would be anyone so kind and measure for me the position of four holes for the smoke discharger on the side armour (Mk.II)? I need to drill them on my project.
Many thanks in advance!
__________________
UCw Mk.III 
|
|
#3
30-08-16, 08:42
|
||||
|
||||
|
Petr I just measured mine as accurately as I can and drawn the hole centres at actual size on an A4 sheet.
But if you have the bracket? You will only need the top left hole as a datum. 3 3/4" from the front corner of armour and 1/2" from to top. Ron
|
|
#4
30-08-16, 08:55
|
|||
|
|||
|
Excellent, thank you very much Ron!
 No, I dont have bracket yet.
__________________
UCw Mk.III
|
|
#5
30-08-16, 09:15
|
||||
|
||||
|
My armour with the holes is original, but I'd be inclined to drill the first hole and wait till you find a bracket before you drill the rest, otherwise you might be chasing them out with a rats tail file.
 Ron
|
|
#6
30-08-16, 10:08
|
|||
|
|||
|
Definitely true, Ron, but I think Im going to make replica of the bracket, so not an issue in this case. Thanks for support!
__________________
UCw Mk.III
|
|
#7
14-10-16, 15:47
|
||||
|
||||
|
Petr, if you are going to make replica brackets, I would be interested in a few.
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481
|
 |
|
|
Hybrid Mode
