|
|
#14
12-04-10, 01:32
|
|||
|
|||
Starting proceedure
Quote:
Jesse.. Make sure you crank it over at least 20-30 revolutions by hand to clear the oil from the cylinders(Or you may break a rod or at least bend a push rod and wreck some valves and pistons..)..it will be in the lowest level cylinders that the oil collects..and migrates to.. and make sure the engine oil is pre heated before attempting to fire.. Good luck..
__________________
Alex Blair :remember :support :drunk: 
|
|
|
Threaded Mode