Trade: RT524 stuff for PRC77/AM2060 stuff

[Jon Skagfeld]

Scotty:

Most of the stuff you're looking for was bulldozed into scrap at Trenton.

Shame, but apparently true...and it wasn't all that long ago!

Good luck in your search. Maybe ebay will be your only hope...assuming you deal with a seller who doesn't interpret ITAR as strictly as some do.

[Scott Bentley]

Originally Posted by Jon Skagfeld

Scotty:

Most of the stuff you're looking for was bulldozed into scrap at Trenton.

Shame, but apparently true...and it wasn't all that long ago!

Good luck in your search. Maybe ebay will be your only hope...assuming you deal with a seller who doesn't interpret ITAR as strictly as some do.

Sadly, I think you're right John. Not a whole lot of this stuff kicking around to be had up here for less than its weight in gold.

[Scott Bentley]

Update,

I've found an AM-2060 Tray. I just need a 25/77 Set now.

So, heres an offer:

1 x MT-1029 Tray,
1 x AM-1780 Intercom Box,
1 x C-2298 Control Box,
2 x CVC Helmets (need drop cords),
1 x MX-6707 AMU with Mounting Bracket,
Required Cables for install.

I can negotiate with some cash to sweeten the deal if required.

Scotty

[Jon Skagfeld]

Scotty:

I'm willing to part with my 77 set...but I'd prefer to sell/trade not just the RT 841 but the whole AN/VRC-77.

Everything is pretty well NOS, especially the canvas parts. Manual included. I'll even throw in a couple of Magnesium BA-4386/U batteries.

RT 841 has seen field use.

With the complete C/L of items, you'll have an AN/GRC-160 which is an RT-841 on your 2060 tray, and all the items required to swiftly re-configure to an AN/PRC-77.

Now here's the kicker...I already have all of the stuff you want to trade (except the CVC helmets).

I'd suggest that we proceed with PMs and see what kind of a deal we can work out.

Regards

PS: CFR plates, ECC stencil still a go?

[Deebo]

Anybody out there who is able to repair PRC 77 and 25`s ?

[sapper740]

Originally Posted by Deebo

Anybody out there who is able to repair PRC 77 and 25`s ?

Steve Haney in Godley, Texas has the equipment, spare parts, and knowledge to repair PRC 25/77 sets.

As an alternative, I have a couple of spare, complete (carrier, antenna bag, handset, flexible and whip antennas with base, and D cell battery adapter), working 25 sets that I would sell, assuming that such a "technology transfer" is legal between Canada and the U.S. $750.00 each. Let me know if you're interested in either option.

Cheers, Derek

[Eric B]

Derek

I might be interested in the Battery adapter for the PRC 77.

Thanks
Eric

cmpmagazine@hotmail.com

[Scott Bentley]

Originally Posted by Jon Skagfeld

Scotty:

I'm willing to part with my 77 set...but I'd prefer to sell/trade not just the RT 841 but the whole AN/VRC-77.

Everything is pretty well NOS, especially the canvas parts. Manual included. I'll even throw in a couple of Magnesium BA-4386/U batteries.

RT 841 has seen field use.

With the complete C/L of items, you'll have an AN/GRC-160 which is an RT-841 on your 2060 tray, and all the items required to swiftly re-configure to an AN/PRC-77.

Now here's the kicker...I already have all of the stuff you want to trade (except the CVC helmets).

I'd suggest that we proceed with PMs and see what kind of a deal we can work out.

Regards

PS: CFR plates, ECC stencil still a go?

Check your mail John. We can bat some ideas around.

Scotty

[Scott Bentley]

PRC-77 has been sourced.

If you are interested in any of the remaining VIC gear, please go to this post:

VRC Intercom Stuff for Trade

Scotty

[Alex Blair (RIP)]

Vintage Field Telephone Set F, MK. 1 Canadian Military

Not mine..No interest..
http://cgi.ebay.com/Vintage-Field-Te...item3a5af18c6d

http://cgi.ebay.com/PR-25-RADIO-PART...item45f2f784db