|
|
#1
09-06-10, 21:29
|
|||
|
|||
M135: Complete or parted out
I have 1 M135 W/O winch relatively complete, that I will sell complete, or the parts separately. I have the following new:
Wheels, complete (NDCC pattern tires) Canvas & top bows Transmission Wiring harness Rear & front turn/BO lights Tailgate other bits & pieces. As it sits, it has 6 wheels on it already- newer tread pattern than the NDCC. Has a transmission in it, but slips out of 3rd gear. Hence the extra one. Has 2 gas heaters, cab & engine. I'll ask $4,000.00 or offers. Registered in AB, Resides in Edmonton. Parts prices, please ask Cheers Don Last edited by M5SS; 18-06-10 at 12:51. Reason: better price, add name! 
|
|
#2
09-06-10, 21:56
|
||||
|
||||
|
Quote:
__________________
SUNRAY SENDS AND ENDS :remember :support
|
|
#3
10-06-10, 01:20
|
|||
|
|||
|
One other thing...
Forgot to mention- there are 2 sets of wheels. Pattern on there now are the earlier SMP tires, Firestone super all traction N.D. pattern. new ones are the original NDCC type.
Point taken- Reply to me, Don.
|
|
#4
10-06-10, 01:59
|
||||
|
||||
|
We have a small website that you can advertise for free. We get quite a lot of hits, people looking for MV. If I can make a suggestion, check the prices on M135, I recently sold one completely running, all repainted, good tires registered for the road. I sold it for $3000 after one year on the market. Please do not take offence of this post, but if you want to sell it check the prices. Gilles
|
|
#5
10-06-10, 13:25
|
|||
|
|||
|
Oops...
No offence taken- rather know now that sit here wondering :-P
So when I said offers, I guess it's alot lower than I thought. So be it. I know these trucks aren't big movers. What is your site, if I may ask? Cheers Don
|
|
#6
10-06-10, 21:28
|
||||
|
||||
|
Quote:
|
|
#8
19-06-10, 07:06
|
||||
|
||||
|
Spare set of tires?
Hi Don,
I am looking for a set of 5 new or like new 11.00 x 20 NDCC for my Ford CMP 3ton ambulance restoration.I need good ones with lots of tread and no cracks for it to pass a safety.What shape are the spare set you have and would you be willing to sell them separate? Thanks,Derk.
__________________
1942 Ford universal carrier Mk 1 1943 Ford 60 cwt long CMP ambulance 1943 Ford GPW 1/4 ton stretcher jeep 1943 Bantam T-3 1/4 ton trailer BSA folding airborne bicycle ser#R5325 (early)
|
|
#9
20-06-10, 16:46
|
|||
|
|||
|
Wheels
Hi Derk
The wheels are perfectly new, never installed. Before putting them in the basement, I rolled them in the snow to clean them off. Problem is, I have 7 of them, and they all have the M135 rims installed with tube & flap. I'd rather see all 7 complete go at the same time. I have no idea, but is the bolt pattern and offset the same? If not, and you're still interested, the rims are the 2 part type, that can be separated with a large prybar. Another approach, the truck now has 6 complete wheels on it, they're used, but I'd say about 95% tread, no cracks, newer type, Firestone super all traction N.D. I can take some pictures and give a price, whichever you prefer if interested. Cheers Don
|
|
#10
20-06-10, 21:32
|
||||
|
||||
|
Tires
Hi Don,
Brand new tires would be perfect.I am interested in the older non directional pattern which is the closest looking tread pattern to a WWII tire.My truck has them on now and I like the look but they are worn down and covered in cracks.I was hoping to pick up 5 tires as I have a Dakota truck and not alot of room to fit more than that but if you want to sell the 7 tires together,I can see about renting a trailer from U haul to bring them back.Would it be possible for the rims to be removed as I would not need them and would lighten the load.Let me know what you think and pictures and a price for the 7 tires would be great.You can send them to; derk_derin@yahoo.ca or my phone number is 1-204-770-7038. Thanks,Derk 
__________________
1942 Ford universal carrier Mk 1 1943 Ford 60 cwt long CMP ambulance 1943 Ford GPW 1/4 ton stretcher jeep 1943 Bantam T-3 1/4 ton trailer BSA folding airborne bicycle ser#R5325 (early)
|
|
#11
20-06-10, 23:49
|
|||
|
|||
|
Tires
Hi Derk
I don't want to give you a bad deal, so I have a better idea. You can get the same tires from Wallace W. Wade, Dallas, TX USA. 214-688-0091. No idea how much they cost. Another thought, I've seen tires that size in the UK with the Dunlop Trakgrip pattern- same as Ferret. Those are a beautiful tire to drive on, Has the same advantage of a helical gear over a straight cut. If for whatever reason that doesn't work, let me know, and we'll figure it out.
|
|
#12
21-06-10, 04:10
|
||||
|
||||
|
Hi Don,
I have done a search for these tires and new cost between $350.00 to $450.00 new which is way unaffordable for me to consider.I like the fact that you are within driving distance for me to pick them up.I would be interested to get a price from you on the set of 7 tires.As for pictures,I have been to your place and if you say they are new,that is what they are! I am on holidays this week and will be on holidays July 4 to 11.I will be going to the mvpa convention in Kansas but could possibly leave at the start of my holidays to pick them up? Derk.
__________________
1942 Ford universal carrier Mk 1 1943 Ford 60 cwt long CMP ambulance 1943 Ford GPW 1/4 ton stretcher jeep 1943 Bantam T-3 1/4 ton trailer BSA folding airborne bicycle ser#R5325 (early)
|
|
#13
03-09-10, 06:31
|
|||
|
|||
|
Quote:
|
|
#14
08-12-10, 05:56
|
|||
|
|||
|
are the gas heaters still for sale, also what about canvass
|
 |
|
|
Linear Mode
