![]() |
#1
|
||||
|
||||
![]()
new project .. this came dowm from QLD 6 years ago .... a very late production aero screen CS8 ..... must be near the last of them made ,18080. The front crash bar damage was done after I did the deal to get it down here ...
MIKE
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#2
|
||||
|
||||
![]()
Great looking vehicles
![]() Best of luck with the restoration When you get the other one down from Queensland you would almost have to have the largest Morris collection in Australia wouldnt you ?
__________________
Have a good one ![]() Andrew Custodian of the "Rare and Rusty" ![]() |
#3
|
|||
|
|||
![]()
Very nice find, Mike!
Interesting to see the crash bar support made from steel strips, I though this was a C4-feature, but I recon it was also seen on "late" CS8's?? Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle |
#4
|
||||
|
||||
![]()
Thanks
I pulled the gearbox off yesterday .. the original factory motor is still in situ . Pics ... the muffler is somewhat stuffed ! Will take me 5 to 8 years I estimate to restore this truck. But I have salvaged many CS8 wrecks for parts/spares over the years , so have enough bits . Under the muffler bracket , a tid bit of the original paint .. a nice bronze green - AKA BSC 22 Mid bronze green .. its a rich grass green colour .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 16-11-10 at 00:35. |
#5
|
||||
|
||||
![]()
Aaaaaaaaaaaaaaaaaaaaaaaaa
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#6
|
||||
|
||||
![]()
Aaaaaaaaaaaaaaaaaaaaaa
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#7
|
||||
|
||||
![]()
The engine is stuck... I have a new set of pistons and new valves ...
These motors have poured big end bearings with shim adjustment , similar to chev 216 . Mains are conventional type shells . The truck is over engineered in some respects eg.. rear axle is more like a 4 ton truck setup, steering components also very strong, probably as RF tyres were standard fitting .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 16-11-10 at 00:40. |
#8
|
||||
|
||||
![]()
Hi Mike,
A look through the Chilwell Census list, for your Contract number comes up with this; Z4434248 to 4434607 Cont. No. V4152 Cat. Ref. 209 Truck, 15 cwt, 4x2, Chemical, type CS8 Mk.III, June 1941 ( the date may have been gleaned from a spare parts list as the list is a repro with added information. ) regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#9
|
||||
|
||||
![]() Quote:
Interesting ... that contract includes some GS and house type wireless vehicles also ... God only knows what this one was . Sadly, I don't have the Z number as the bonnet is missing ... it doesn't appear to have had the towing setup on it . The only clue as to its previous use is: On the grill , is hand painted "Q 5 " in large size script .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 16-11-10 at 01:26. |
#10
|
||||
|
||||
![]()
The bonnet from the 1939 CS8 wreck ...this bonnet is from a later truck I think... number is too late for 39
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#11
|
||||
|
||||
![]()
Spent a few hours tweaking the spanners and the motor is ready to come out
Good news: No rust disasters in the cylinders , about 5 thou ridge evident . These motors have some oddities: All threads and bolts are metric . Morris bought the French Hotchkiss factory and inherited the Metric tooling . Valve lifters are located in three seperate blocks that unbolt from main engine block
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#12
|
||||
|
||||
![]()
bore is standard 82mm ... PHEW
![]() Slight disaster .. tried to remove one of the water jacket side cover bolts.. one broke like it was made from putty . Carby is a replacement .. A Carter BB-1 .. a generic aftermarket carby used on many cars
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#13
|
||||
|
||||
![]() Quote:
Yes, that contract was for several different body types, but the Cat. Ref. No. on the Contract plate narrows it down from what I found in the Chilwell list, 209 is the Truck, Chemical. Now this type of vehicle has come up before, seem to think it might have been something to do with washing down in the event of chemical weapons being used, could be a bit wrong there, but sure someone will know.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
![]() |
|
|