|
|
|
|
#1
29-12-10, 23:02
|
|||
|
|||
Richie i am going to have another couple of brass bren scockets cast by a really good local guy , let me know if you need any blanks ( you will need to do the finishing ). I will also be getting a pile of other bits made is there anything you need ?
its not quite finished , still stripping down but the surch for parts is going very well, i have had a great responce from friends on here helping. may be done by the end of the year. i think as kevin said the rear mtg was put inside as it would foul the ronson tank. it looks like it was made as a ronson from the factory, i have all the ID numbers now and it all ties up. sorry no more photos of the Loyd bits yet, got to go back and dig the rest out as well as a couple of wheels and tyres for our 6 pdr that just happen to be laying in one of the sheds, thes guys must have cut up a mountain of vehicles. full story when i get 5 mins to write it down. Its a long story for a cold winters night ! 
|
|
#2
30-12-10, 00:09
|
||||
|
||||
|
well i am deffo after the linkage cover that goes at the base of the steering column and perhaps some pintle mounts too...it all depends on costs really bud.
I could have made you some sand guards but it appears the ones I have made are 1" too short in length, Kevin sent me the pics and they are a wee bit shy in length, so until i can get a new pattern (as my originals are too short) i wont be able to make anymore...... I am doing a number of sets of rear fenders for various folk on here so if you need some let me know and i will add another pair to my pile.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). Last edited by RichardT10829; 30-12-10 at 00:23.
|
 |
|
|
Hybrid Mode
