MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-11, 13:56
ajmac's Avatar
ajmac ajmac is offline
Alastair McMurray
 
Join Date: Sep 2006
Location: Lincoln, England
Posts: 435
Default

How many sets are you going to need to bring the pattern costs down to an acceptable level? Or are they attempting to mould from an original?
__________________
Alastair
Lincoln, UK.


Under Restoration:
1944 No2 MK2 Loyd Carrier - Tracked Towing
1944 Ford WOT6 Lorry


The Loyd on Facebook
Reply With Quote
  #2  
Old 10-01-11, 14:14
Ben Ben is offline
Registered User
 
Join Date: Jul 2010
Location: UK
Posts: 544
Default

Pretty good interest so far.... more would be nice.

I'm not moulding from an original directly as this will makes the finished part too small due to shrinkage. a new tool allowing for shrinkage is made (3d scanned so it's correct) then the casts are from that. part of the cost is in the set up which is the same regardless.

Not sure if supplying our own brass will help but i can ask.

Cheers

Ben
Reply With Quote
  #3  
Old 10-01-11, 20:34
eddy8men eddy8men is offline
AKA Rick Wedlock
 
Join Date: Dec 2009
Location: manchester
Posts: 715
Default

hi ben

i'm pretty sure i'll need 2 but i can't be certain til i get to see the carrier later on this week.
glad to see someone taking on the challenge. i think i speak for all of us when i say we appreciate you doing the legwork to get it sorted

cheers

eddy
__________________
_______________________
1941 mk1 mortar Carrier
1941 Mk1* Carrier
1942 Mk1* Carrier
1943 T16 Carrier
1945 Mk3 Dingo
1941 Mk3 Covenanter
1941 Mk4 Churchill AVRE (now sold)
1944 Mk6 Cromwell (now sold)
1952 Mk3 Centurion
1952 ARV Centurion
1952 ARV Centurion
1953 Mk3 Centurion (breaking)
Reply With Quote
  #4  
Old 10-01-11, 21:45
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,069
Default

ditto.... i should have said earlier. cheers Ben.


Shaun you must know folk with carriers (that have no pintle mounts)
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #5  
Old 11-01-11, 13:26
Paul Butler Paul Butler is offline
Registered User
 
Join Date: Sep 2010
Location: New Alresford UK
Posts: 8
Default

Hi Ben

I would be interested in a full set as well please.

Thanks for the invitation

regards
Paul
Reply With Quote
  #6  
Old 11-01-11, 19:16
carrierbarry carrierbarry is offline
Barry
 
Join Date: Apr 2007
Location: Watford, London
Posts: 216
Default Pintles?

Just how many is a full set?
Would they not be cheaper made out of some other metal?
What about machining and the lever section?

Well done Ben for taking the lead.

Barry
Reply With Quote
  #7  
Old 11-01-11, 19:40
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,069
Default

i beleive it is 4 (on a mk1 General Purpose carrier) one behind the drivers head on the center bulkhead, one on the drivers side armour, one on the rear armour and one on the top of the engine cover.... there may be more but i think that is all i have seen thus far.
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 18:07.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016