CFR Request Thread

[rob love]

Originally Posted by rob love

C30-010-000CF003 is a generic modification for SMPs. It could be the seatbelt installation, but I can't say for certain. The seatbelts or the windshield washers are possible. I may have the answers downstairs in one of the many milkcrates of CFTOs I have squirrelled away, but no promises.
C-30-100-000/CF014 is the modification to the lower generator bracket to prevent busting the ears off the alternator. It consisted of some sliding bushings (which would just sieze anyway).
C30-103-000/CF004 should be a mod for the Cdn3. I am afraid I do not have anything on this one in my main book.

There was no mod to go to a M151 air filter. That pattern of filter assy was standard from the factory on both the Cdn2 and Cdn3 series of M38A1s.

By coincidence, I was going through some piles of paper downstairs, and voila, there was the index of the C30-010-000/CF mods. These were mods that were applicable to more than one vehicle fleet, so the m od would get the 30-010 number rather than a fleet specific application code (ie 30102=M38A1Cdn2, 30200=5/4 ton). Anyway, here are a couple of the modification instructions which we see on some of these searches.

C30-010-000/CF003: Modification of distributor caps and covers for use with autosense computerised diagnostic equipment

C30-010-000/CF009: Installation for std commercial turn signals-truck 1/4 ton Cdn2, cdn2, 2-1/2 ton, 5 ton M39 series

C30-010-000/cf-013: Installation of lap safety belts, 1/4 ton, 2-1/2 ton, 5 ton and M809 series.

There were other mods running up to CF015 listed on the index, but most of them will not concern this thread.

Man, the scraps of paper I have kept, it's a miracle my house has not burned down.