|
|
#1
08-01-04, 01:40
|
||||
|
||||
CMPs for sale in Canada
I came across some stuff that's for sale and told the collector I'd post it on this forum for him since he doesn't have internet access. His name is Mike and he's situated near Melfort, Sask. Phone him at 306-277-2004. The CMP is a 1945 HUP staff car with the sliding windows. It's mostly there and is driveable.
Here's the Penguin pictures. The Caddy engine has been replaced with a 318 Chrysler but the rest looks original. The tracks are good and it was used this fall in hunting season. Here's some misc CMPs he has for sale too. The two on the left are F15s and the other is a F30S with the crossmember for the winch. 
|
|
#2
15-01-04, 23:43
|
|||
|
|||
|
Hi everyone. Mike here, Owner of these vehicles, I would like to take the opportunity to tell you that you can now reach me directly by email at mikes_army@hotmail.com
If you have any questions you can reach me there and I wil be able to get back to you ASAP. I am also working on a website at the moment however it is still only very basic with a few photos of my collection for now. I will be adding more detail and photos to it as I can but you can feel free to have a look at it so far. www.geocities.com/mikes_army/ Thanks all Mike Heiberg Last edited by mikes_army; 28-01-04 at 01:11.
|
|
#3
19-06-04, 15:34
|
||||
|
||||
|
C15A on Milweb
The following on milweb.net:
Canadian CMP for sale. Chevrolet C15A. Cab Model: 13 Original engine in running condition. Needs complete restoration. Some parts missing. No box. Was used as a "log hauler" by forest workers. $850.00 cdn Located near Montreal, Quebec. name: Eric Joubert tel: 450-563- 2495
__________________
SUNRAY SENDS AND ENDS :remember :support
|
|
#4
20-06-04, 00:09
|
||||
|
||||
|
C15a on milweb
Now, that's a temptation. Some little voice has been tellng me it's time I got serious about a long-tem CMP project, after playing about with Land Rovers for some time. I was just eyeing another C15A chassis and cab on offer on CONVOY ads.
As for this on on milweb, it would be the logistics of getting it from Quebec to Manitoba ... tempting, though.
__________________
Member: Prairie Command, Ex-Military Land Rover Association 2110, MVPA 29055 ’45 Chevrolet C8A CMP HUP “Staff Car ”, ’82 Land Rover Series III, 109" ex-MoD, ’80 Honda CX500D, ’48 Ferguson TE20
|
|
#5
20-06-04, 03:40
|
|||
|
|||
|
Try getting one from Manitoba to Tampa!!
Jonathan  :
__________________
1943 Airborne James ML 1942 US Army Columbia Bicycle 194? BSA Folding Bicycle 1942 F15 Cab 13 1500cwt GS (soon) MVPA #13182 Prairie Command
|
|
#6
20-06-04, 07:57
|
||||
|
||||
|
Aaah, you must be the fellow who bought that15cwt from Derk - he mentioned you were working out the movement details. I had a look at it at his place a few weeks back ... it's what got me thinking it was about time I pursued my own, when I saw that one was going south.
__________________
Member: Prairie Command, Ex-Military Land Rover Association 2110, MVPA 29055 ’45 Chevrolet C8A CMP HUP “Staff Car ”, ’82 Land Rover Series III, 109" ex-MoD, ’80 Honda CX500D, ’48 Ferguson TE20
|
|
#7
26-06-04, 03:00
|
|||
|
|||
|
Yes, Mark, its me, the silly american, who wanted a CMP for 10 years. The weird part is Gordon posted the ad and he was the 1st person to help me learn about CMPs!
Still calculating how to get it here....sigh. Jonathan
__________________
1943 Airborne James ML 1942 US Army Columbia Bicycle 194? BSA Folding Bicycle 1942 F15 Cab 13 1500cwt GS (soon) MVPA #13182 Prairie Command
|
|
#8
27-06-04, 03:07
|
||||
|
||||
|
Jonnie: I'm beginning to understand your problem, after looking into various options ... might look for something closer to home.
Oooh, James ML - very nice. I had a Triumph TRW a few years back, but in my dreams would really like Norton 16H
__________________
Member: Prairie Command, Ex-Military Land Rover Association 2110, MVPA 29055 ’45 Chevrolet C8A CMP HUP “Staff Car ”, ’82 Land Rover Series III, 109" ex-MoD, ’80 Honda CX500D, ’48 Ferguson TE20
|
|
#9
09-07-04, 03:49
|
|||
|
|||
|
For sale in Canada: “Ford Army Truck”
From the Classified ads in the July 5, 2004 issue of OLD AUTOS:
“FORD ARMY TRUCK, approximately 1940, 1 ˝ ton, flathead V8, dump box, plow harness, good body - $1000. OBO. Phone (705) 746-2351 after 6 p.m. Parry Sound, Ont.” FYI only – I have no connection with this sale. Brian
|
|
#10
02-09-05, 16:19
|
||||
|
||||
|
CMPs for sale in Canada
Fellas, I recently aquired a chassis w/ engine that I wish to sell.
It is a Chev w/ 216cid engine that runs very well. I believe this chassis is a CGT. It has a 2 speed transfer case and what appears to be the bracket surface for the winch pillow blocks to mount to. The left frame rail is bent and much of the cross members are in bad shape. Realistically, it is a good parts machine at least for the engine and drivetrain as well as a few takeoff pieces. Asking $600, PM me if interested. Last edited by chris vickery; 06-09-05 at 22:41.
|
|
#11
07-09-05, 04:54
|
|||
|
|||
|
Can you......
Hi Chris
Is it possible to take pictures of the engine...dist side....front... carb side....... focus on fuel line..... vacuum lines..... throttle linkage and oil line to filter if any....... I am actually trying to help out Francesco in Italy with his rebuild...... Thanks Chris Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#12
07-09-05, 16:12
|
|||
|
|||
|
I could be interested in the transmission, Is the rear bearing retainer intact. How about the front Brakes, are they the larger CGT type?
|
|
#13
10-06-06, 07:18
|
||||
|
||||
|
CMP's for sale
A fellow CMP collector is parting out 7 CMPs , 11 cab, 12 cab, 13 cabs, 15wt, 30 wt long WB and short WB, Ford and Chevrolet, no rust but poor to good body condition, non running . Send private email.
|
|
#14
25-12-06, 08:42
|
||||
|
||||
|
CMPs for sale in Canada
Ad found on Milweb:
Quote:
__________________
Regards, Hanno --------------------------
|
|
#15
22-01-07, 17:39
|
|||
|
|||
|
No longer for sale
As of yesterday, the project has become mine. Let the fun begin.
|
|
#16
22-01-07, 18:00
|
|||
|
|||
|
Thank you.....
Big thanks to Hanno for pointing out that the truck was available relatively in our backyard..... sure shows how much the world has shrunk with the web...... a worth while project when one considers that about half of the resto bull work as already been done...... and with a rebuilt engine.
Almost enough parts to make two trucks..... save from the crusher by Kaptain Natcho....... Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#17
22-01-07, 18:13
|
||||
|
||||
|
Re: No longer for sale
Quote:
Your patience paid off for you. The new baby looks to be in good shape. It would be grand if we three all had rolling frames this spring. Are you up for the challenge?
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#18
22-01-07, 19:29
|
|||
|
|||
|
It would be nice...
but I would like to check several details of the PO's (not Petty Officer, previous owner) work. Such things as CV joints, did the axles get cleaned inside after sandblasting and before reassembly, state of the brakes and lines, remove the attempted conversion to LHD power steering and install RHD steering, get master cylinder in place so the lines can be filled and checked for leaks.
I won't be able to follow your sage advice to "take lots of pictures before you take it apart" since the PO did much disassembly and a fair bit of reassembly. As you saw, in some ways it resembles a 1:1 model kit with (almost) all the pieces there, but no instructions included. You know, "some assembly required".
|
|
#19
22-01-07, 22:10
|
||||
|
||||
|
Re: Thank you.....
Quote:
Congrats Grant, keep us posted on progress! Linked from Great Day at the Hammond Barn
__________________
Regards, Hanno --------------------------
|
|
#20
22-01-07, 22:30
|
|||
|
|||
|
That answers my questions
congratulations.....You won me out. If there was no takers on the trucks and parts I was negotiating my 42/43 MB project with Luc as a swap.
Regardless at least they have a good home....my CMP search continues. Cheers and all the best. Mike Timoshyk
|
|
#21
22-01-07, 22:51
|
||||
|
||||
|
Rotters of Distinction
Quote:
We are OTTAROTTERS Hanno is a ROTTERDAMER Torontonian members are TROTTERS Western members are WROTTERS Maritime members are MARROTTERS Quebec members are QUROTTERS I know... Too many Keiths.
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#22
23-01-07, 01:13
|
||||
|
||||
|
Rob, reading your post has me "tired". I have now fallen "flat" and need to "tread" away from the forum...
and to think of all the unemployed comics out there... 
|
|
#23
23-01-07, 01:14
|
||||
|
||||
|
AND WOW, I SEE I HAVE HIT 700+ POSTS!!!
|
|
#24
23-01-07, 01:17
|
||||
|
||||
|
Royalties
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#25
23-01-07, 01:29
|
|||
|
|||
|
ever been here?
Can't find this place on the map.....could have used their supplies a couple of times...
|
|
#26
23-01-07, 01:30
|
|||
|
|||
|
Forgive my indescretion....
Forgive my indescretion....it was too good not to share.
|
|
#27
23-01-07, 01:36
|
||||
|
||||
|
Re: ever been here?
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#28
28-02-07, 10:08
|
|||
|
|||
|
Quote:
|
|
#29
28-02-07, 10:10
|
|||
|
|||
|
Re: ever been here?
Quote:
|
|
#30
03-03-07, 15:18
|
||||
|
||||
|
Re: Rotters of Distinction
Quote:
__________________
Quis custodiet ipsos custodes?
|
 |
|
|
Linear Mode
