Aerial mast base

[nigel ward]

Yep Jordon. no problems. Mail it down.

Nigel Ward
Po Box 1512
Toombul, Queensland
Australia, 4012

Thanks Shaun. Your on the list.

Richard. You gave me an idea. I wonder if it is best that I tack weld the bits into the correct positions and let those who buy finish the welding to their..........standard. If the new owner chooses tig, mig stick or oxy that's up to them.

Show of hands please.

Hi Phill. We have to talk. 0418 795 022 I'll ring you straight back.

AND

I am grateful to have acquired a pogo stick from a follow carrier nutter (it's ok ,he called me a "bird" once). I have priced the bren attachment to be cast and done some of the sums for the rest including the spring. In truth, I've brought the pipe already. That was a good way to spend money I thought the steel man meant per length but it turned out to be per metre.

So, they look like being somewhere around $200+ Aussie dollars each.That's about the same in US dollars at the moment.

Any interest?

Oh and I'm making Sheppard crooks as well. $200 Aussie each. Blacksmith made with old 1 inch bar from a scrap yard. got that old look about it. 3 in England and 2 in France already. I think about $100 Aussie to post.

Thanks
N

[shaun]

Hi Nigel,
I can weld mine together as well.
Thanks
TTFN
Shaun

[RichardT10829]

ditto with shaun, you can mail ours together if he is ok with that as i will be seeing him in a few weeks time (If Shaun is up for this) Just PM me how much you want etc etc and postage.. i would not even worry about tacking them up all i need is a reference shot or two so i know what bit goes where and i will mig them up.

[Mike K]

I need one of those toothed bases for my FFW 8 cwt Morris PU truck.

I have detailed pics of the antenna mount/base setup with the No. 11 set.

Put me down for a base .....I dont need the carrier mount , just the base itself.

Maybe Rory in the UK would need one as well ?

I have the 7/8" rods from the golf bag mast kit .. these are 3ft sections from memory... they fit the "ebonite B" base.

Mike

[Ron Pier]

I'm with Mike Kelly. I would also like the base only without the carrier bracket for my Morris. Any chance? If so, I'll ask Rory and probably order two.

Ron

[Jordan Baker]

Thanks Nigel, I'll get the arm mailed early next week.

I'd perfer the welding/riveting to be done on the one I get. All that I'd like to do is bolt it together and then bolt it onto the carrier.

I'd also be interested in one of the shepards crooks to go on the front of my carrier.

[kevin powles]

Lynn, Thanks for the info, You couldnt put together a quick sketch with measurements of that bottom attachment, thread size, length etc. Also what the diameter of the spring please, looks similar to a 3 inch mortar recoil spring.

Thanks again kev.

[kevin powles]

Hi Nigel, Any news on when the bases will be ready for dispatch to the Uk.

Thanks Kevin.

[Doug Lavoie]

Nigel,
Could I get one of the bases that bolt to the Universal carrier as well?
Doug