![]() |
|
#1
|
||||
|
||||
![]()
Tony
5ml of oil isn't much.. maybe not enough ! If the tappets on that weak cylinder are OK, then you probably have a leaky valve . Try Phils idea , use an old spark plug and braze a compressor fitting on to it ...or a tight fitting clamp might do. After you pump the air into the cyl. put your ear next to the exhaust outlet and listen for a hissing sound . Then go to the carby and listen. Or just go for it pull the head off ! Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#2
|
||||
|
||||
![]() Quote:
Thanks mate, I will do the wet test again with more oil and have a look at the other suggestions as well. ![]() Cheers Tony ![]()
__________________
Anthony (Tony) VAN RHODA. Strathalbyn. South Australia |
![]() |
|
|