![]() |
|
#1
|
|||
|
|||
![]()
....you are good! I knew you'd have the answer.
In my friends 53 he has the 24 volt 3 prong flasher clipped to the column just beside the dash. Never dawned on me it was 3 prong. And I have 3 spare ones. Thanks. |
#2
|
|||
|
|||
![]()
That's what she said.
|
#3
|
|||
|
|||
![]()
What happens when you earth out that wire?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#4
|
|||
|
|||
![]()
The lamp is grounded inside the control housing. All grounding that wire would do is make a complete loop from ground to lamp to ground.
|
#5
|
|||
|
|||
![]()
I thought it might have been an "earth return system", but I remember now that that system requires two separate dash indicating lights.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#6
|
|||
|
|||
![]()
Here is a wiring diagram I borrowed from the net which gives all the info on the signal stat 800 switch. Credit to the CJ3B website.
|
![]() |
|
|