|
|
#3
24-10-11, 22:25
|
|||
|
|||
WS 19 6pt connector
Hi Jordan,
While Bob's method would work it is a bit severe. The approved method would be to: Remove spring clip that holds the top cover in place Remove top cover - it hinges Around the plug body near the pressed ring you will find three slots with a thin metal spring tab protruding through. Push each tab in till they clear the body. Gently push the face of the plug, where you removed the screw, out toward the top, it should just slip out. Cheers, Dave 
|
|
|
Threaded Mode