|
|
#11
11-11-11, 02:40
|
||||
|
||||
On the civvy trucks the one tons and smaller had the fenders with the small wheel openings. The ton and a half trucks had either the small or large openings. The two tons and larger had the large openings. The military trucks likely all used the large openings to clear the military tires. The military wheels were offset more than the civvy ones so gave a wider track.
The 40 and 41 trucks had the narrower grille with the headlights mounted beside the radiator. The 42 and newer trucks had the headlights mounted on top of the fenders. All the trucks from half ton on up used the same frame dimensions from under the cab to the front bumper. So did the C8 and C15 two wheel drives. The heavier trucks used thicker material in the frame and some had doubling plates on the outside of the frame rails.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 16" 8 bolt Split Rims for 1.5 ton Australian Chevrolet Trucks | Philippe Jeanneau | The Softskin Forum | 66 | 13-08-20 15:17 |
| Other Wheel Options for Early Chevrolet 1.5 ton Trucks... | Philippe Jeanneau | The Softskin Forum | 5 | 01-07-19 01:42 |
| 10 bolt Front Hubs for 1.5 ton Australian Chevrolet Trucks 1940-1945 | Philippe Jeanneau | The Softskin Forum | 0 | 31-03-19 17:13 |
| 1938 Chevrolet 15-cwt G/S trucks | David_Hayward (RIP) | The Softskin Forum | 9 | 15-09-06 02:44 |
| CC60L Chevrolet Modified Conventional Trucks | robbi7 | The Softskin Forum | 23 | 14-05-04 14:28 |
Threaded Mode