|
|
#20
04-01-12, 10:54
|
||||
|
||||
Felpro Rear Seals
Today I received a set of Ford rear hub inner seals from USA, made by Felpro.
P1040585.jpg P1040592.jpg They are NOS. The leather is firm but not unusable. P1040589.jpg I'll just do as the instruction says, and they will be fine. In all honesty, I didn't really need these at this point in time, but saw them on ebay & struck while the proverbial was hot. They cost $21.15 AUD for the pair. Shipping was not expensive at all. P1040588.jpg The purchase was basically a 'fishing trip' to get a close look at them as an alternative to other brand types & seal numbers which are previously known. By having a close look at the first photo, you can clearly see what other makes of vehicles they are compatable with. I notice they are described as "Rear Outer Retainer" which is curious, because I know them (and used identical ones) on rear inner wheel hub! P1040586.jpg Hows this for a box!!!! Isn't the corner strengthening brilliant? Tell me ONE place where this still occurs!!!! Ah, the nostalgia. I will add these to the archives of "Modern Part Nos for CMPs" on this site, though they are not really applicable but may assist someone. 
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
|
|
Threaded Mode