|
|
#4
13-02-12, 00:50
|
|||
|
|||
Which ones.....
The springs or the rings.....?
Kiddin' you...... the rings are about 1 inch...... springs about 3/8 in dia.........key chain FOB rings are the right size and are easy to install...... The springs Grant sourced them in the USA ..... comes in 24 or 30 inch length you just cut them to size....... I found some springs at Princess Auto a few years ago..... they were long enough to make two from each spring..... not sure if they still have them........ I will ask Grant where he ordered them from....... Some where in the barn we have seat frames with the flat disc ..... in fact I think I have seen some that where washers that had been drilled...... we were considering drilling the galvanized circular plugs from electrical boxes as a substitute....... probably could drill some 0.25 cents pieces and they would be cheaper...... but then Rob ordered a bunch of rings from TO hardware wholesaler...... bags of 50 or 100..... Got some pictures of E brakes to show you will forward seperate. Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
|
Threaded Mode