C8 progress in Texas

gordon · #1 09-03-12, 19:09

Doesn't the locker height block out any rear view though. Bearing in mind you are already driving on the 'wrong' side?

Could still use a pair of Dodge front door glass frames if you run across them - wont need them for years, but would rather have them on the shelf.

Give the '34 dump a pat from me.

Gordon

David DeWeese · #2 09-03-12, 20:25

Hi Gordon,
Yes, the locker shown in the center photo I posted does interfere with the rear window, but the other two versions won't.
I measured carefully before making the lockers to avoid that, so mine will be even with the bottom of the rear window opening. The locker also needs to be a certain height for the spare tire brackets mounted on the locker to work out,(photo).

I still have one window surround here for you and will be picking up another closed cab 1/2 ton in two months that I will be parting out, so I think you are covered when you need them....

The'34 Dodge says "hi".
Regards, David

gordon · #3 09-03-12, 20:32

no problem all round then -see what you mean about that height.

I'd offer to watch out for suitable bits round here for you, but only ever seen one cab in Scotland that wasn't a 13 cab, It was a Ford, but don't remember if it was 11 or 12.

Next big lottery win I'm offering on the '34.

G

David DeWeese · #4 12-03-12, 04:09

Had some time this weekend to make the spare tire carrier. Only tack welded the threaded rod for the wing nut as I am sure the tire dimensions will change once it is inflated, and some adjustments will be needed....
Next project is making the spare wheel. That's the last thing big I will have to fabricate, then I can finally return to repairing/restoring only original parts!
Thanks, David

Bob Carriere · #5 13-03-12, 03:57

....going to make a spare rim for the spare tire.....????

You continue to amaze me..... !!!! doesn't anybody have a spare rim....? anywhere...?

Bob

David DeWeese · #6 13-03-12, 05:36

Hi Bob,
Unfortunately these 13" wheels are very hard to come by, no matter where you are located on the globe. Of course, I am screwed down here in Texas.

If anyone has an affordable extra 13" wheel, please let me know.

edit: Bob, the plan is to use the center out of one of my 15" aftermarket wheels I bought a while ago,(post #65). The center will be cut out, turned down to correct size on my friend's lathe and welded into one of the wide late '60's Chevrolet Corvair 13'' outer rims.

Thanks, David

David DeWeese · #7 17-03-12, 04:27

Hi,
Had one open day this week to make that spare wheel. Cut out the centers of both wheels and headed over to a friend's house to use his lathe.
Things got slow when I found out the edge of the center rim piece I was working with was now hardened from cutting it out with a torch. Add to that the saw-tooth profile of the piece from the torch work, and it made for agonizingly slow progress to keep from breaking tips off the cutting tools..

Things got even slower when the automatic feed on the lathe broke, so the rest of the machining was fed by hand for two hours.

Anyway, made it home in time to dress the outer rim, true everything, weld it, prime it and put on a coat of paint before the sun went down.

Thanks, David