|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Carrier Idler Wheel Re-rubbering 
			
			Hi all - I am considering commissioning a mold for this wheel, similar to my Carrier wheel re-rubbering.  Before I do this I am looking for expressions of interest.  I have no idea at this stage what the re-rubbering cost would be and I do not have any to do a sample run.  Given that this would be a limited market, two per Carrier and the fact I do not have any, I need to carefully research the feasibility of this project.  If anyone out there has a spare I could obtain it would be appreciated. Bob 
				__________________ Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Bob, can you not just use your first mold and turn the rubber down to the correct diameter ? or am i missing something (which is highly likely)
		 
				__________________ is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Missing Something 
			
			Hi Richard - these wheels are the upper track support wheels and only a quarter size of the track wheels. Bob 
				__________________ Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com | 
| 
			 
			#4  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			ahh the return roller... sorry i thought you meant the front idler wheel matey... my bad.
		 
				__________________ is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			Those are small enough that they likely would be inexpensive to ship...are the Aussie return idlers the same as the Canuck ones?
		 | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  No Go 
			
			Well due to the under-whelming response, this project will go on the back-burner. Bob 
				__________________ Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com | 
|  | 
| 
 | 
 |