|
|
#20
30-04-12, 02:29
|
|||
|
|||
Ron , Kevin, Nigel + others
O.k guys, I am sorry i forgot about this.
I have today stripped the insulator from the brass base. (was not easy) I better have an indication back from interested parties, as to what they might like. The base ring, the insulator cup or both. As an indication, I sent 8.000kg's in a small box to the U.K. Post cost me about 100 pounds. The two bits weigh in on my bathroom scales at 1.8kg. I am not intending to remove the chain assembly from the cup. It can be machined (faced, drilled, and tapped by the owner) who can then make up the chain and screw assembly. Ron, the inside dia. of the cup is about 84mm. I believe Phillip has the ring for the smaller (5/8") base. You might prefer to have his copied? I will obtain a price based on the numbers. Let me know
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
|
Threaded Mode