|
|
|
|
#1
17-05-12, 21:43
|
|||
|
|||
Ben
The was a thread about manufacturing track (Aust) It was a guy from an engineering company, who was working with a Chinese manufacturer. The problem was the price was going to run out at about $8,000.00.
The engineer chap dropped it due to lack of interest. Maybe there is still enough track out there?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
17-05-12, 22:29
|
|||
|
|||
|
That was kind of my point. If you said a single track link would cost £15 each as a raw casting plus a couple of pound each for machining, drilling then you needed the pins. The numbers get pretty big quite quick.
I think if you can get NOS track for £25 a link its probably a good but expensive buy!!! plus you'd be sure it worked. New track would be no cheaper IMHO. Ben
|
|
#3
17-05-12, 23:06
|
|||
|
|||
|
Looking back
Search a thread called "reproduction UC track availability)
At post #58 Wayne Henderson of western Australia has the original moulds for Australian track. There are pictures posted at #65. A lot can be gleaned from this thread. Could a Moderator move these few posts from Andrews thread, to that thread, and delete all but line 2 of this post
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
 |
|
|
Hybrid Mode
