|
|
|
|
#1
04-09-12, 01:28
|
|||
|
|||
Hey Gary what's under the kilt?
I think the balls fell out! 
|
|
#2
04-09-12, 06:18
|
|||
|
|||
|
The cause is not loose bolts but the lack of the spacer ring on the output shaft. I'll look up the thread and pictures from several years back on this forum. It's a ring made of flat steel 3/8ths wide wrapped around the shaft and butt welded. It keeps the output flange from being drawn up to tight against the transmission. the ring is NOT in the parts book and the military output flange is 3/8ths shorter than a civvy one.
|
|
#3
04-09-12, 06:52
|
|||
|
|||
|
Quote:
Look up post 116(?) on this thread Gary for the transmission cause/fix 
|
|
#4
16-09-12, 00:49
|
||||
|
||||
|
T-Case
Hey Harry
Thanks for that info. Is there a trick to geting the cover of the transfer case off? I have tried to take the smalled peice off the cover and the cover but it will not budge around the spot where that flange is, (check the pics of the transfer case in previous posts). Gary
__________________
C-15A C-60S Universal Carrier MK II x4 M152 CDN VW Iltis and M101 Trailer   
|
|
#5
16-09-12, 07:15
|
||||
|
||||
|
Pics
I went out and took some pictures of the part I am talking about.
Gary
__________________
C-15A C-60S Universal Carrier MK II x4 M152 CDN VW Iltis and M101 Trailer
|
|
#6
18-09-12, 06:52
|
||||
|
||||
|
T-Case
Well I figured it out, Brute force and ignorance works everytime. I had to use a small sledgehammer but the cover finally came off. The great news is that all the gears and bearings look good, all I need to get is new seals and gaskets.
Gary
__________________
C-15A C-60S Universal Carrier MK II x4 M152 CDN VW Iltis and M101 Trailer
|
|
#7
18-09-12, 06:57
|
||||
|
||||
|
More Pics
More pictures of the t-case.
__________________
C-15A C-60S Universal Carrier MK II x4 M152 CDN VW Iltis and M101 Trailer
|
 |
|
|
Hybrid Mode
