MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 22-11-12, 11:36
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Hey Andy!

Hand brake lever finished 1.jpg Hand brake lever finished 2.jpg Hand brake lever finished 3.jpg
That hand brake lever came up fairly good.
Certainly a little better than when you saw it last, I hope. Finished it while doing the windscreen frame painting, to make mixing the paint worthwhile.
Yet another part to store carefully until needed in months/years.

I reassembled the driver side windscreen this evening. Hmmmm, it's OK I guess, but not perfect. Temporarily installed the outer seal and cut the corners, ready to glue tomorrow afternoon. It's funny to see so many restored vehicles which don't have the outer seal parts joined together, just all sitting there seperately. All for the want of a 'bees' of super glue. Just leave a slight bit more length than minimum. The rubber may shrink over time. From my experiments, the glue wouldn't break though. I did a test on a scrap piece before I did passenger side, and flexed the joint back & forth for a couple of days, until I got sick of that and pulled the bits apart. Glue remained, rubber broke apart.

I have booked the car transporter trailer for 0800hrs Saturday A.M, so I am going to get the chassis, one way or another. Not losing my rental money! It better be ready for me, or.........."Don't make me angry, you wouldn't like me when i'm angry"
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
  #2  
Old 25-11-12, 21:19
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Chassis returns

Saturday morning I got the chassis back. As usual, it wasnt ready when I arrived to get it. One weld repair, and the holes for the two pintle brackets were not done. Despite me providing a photo, the guy that made the cross member fabricated it the way they do for large trucks and not as per the clear photo I had supplied.

I am grateful that all the holes line up, and after I did an awful lot of cleaning, smoothing and etch priming, I tightened the bolts and checked the chassis alignment. Almost dead straight!

Photos will follow when I get back to my computer. This portable device doesnt shrink the photo size easily.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
  #3  
Old 28-11-12, 11:37
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Chassis Work

Chassis repair 1.jpg Chassis repair 2.jpg Chassis repair 3.jpg Chassis repair 4.jpg Chassis repair 5.jpg
Finally back on the computer again. Here are the photos showing current state of chassis. Waited 2 hours while they finished the work that was 'ready' for me to pick up. It did give me opportunity to see how they drill holes, and how they cut larger round holes using the Oxy-Acetyline torch. That was quite impressive to see actually. I took the pintle brackets off before I attempted to trailer the chassis home. They would have been too heavy for me to safely 'wheel' the chassis around on the axle I have temporarily chanied, for mobility.

I kept a real good watch on the rail alignment as I torqued each of the bolts around the rear member etc. Pleased to say it wouldn't be more than 2mm out of true! Yay!!

You will note that the rear cross member has a cut-out section at each end, unlike original. This annoys me, but in reviewing the photo I had given them, the ends of the rear member are actually VERY difficult to see in the photo, not that I believe the photo ever was shown to the guy that did the work! This method is how they do all replacement cross members for the heavy vehicles they do. It's supposed to give greater ability to flex. I have no plans to alter this now. I will be putting a second bolt on top surface of the cross member, and will need to add another hole underneath, where the spring hanger bolts through chassis base.

The new sections of chassis rails look good, too good really, because it's the only part of the chassis that doesn't have a surplus of holes along it.

It is ironic that I finally get the bloody thing home, just days before we all depart for annual holiday, so no work will be done for roughly the next 2 weeks. The new security system and neighbour with 12ga will deter would-be thieves in our absence.

I will have my tablet device with me on holiday, and hope to be able to post from a 'historically significant' location.....or two
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
  #4  
Old 28-11-12, 12:00
hrpearce's Avatar
hrpearce hrpearce is offline
WO8 C15A 142736
 
Join Date: May 2007
Location: Batlow Road near the Cow & Calf
Posts: 1,958
Default

From hear on the more you bolt to the chassis the greater the urge to finish.
__________________
Robert Pearce.
Reply With Quote
  #5  
Old 28-11-12, 12:24
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default

Quote:
Originally Posted by hrpearce View Post
From hear on the more you bolt to the chassis the greater the urge to finish.
Yeah Robert, I understand what you are saying, and hope I don't start rushing things to the extent that I make a bollocks of something!!!

Once I actually get the frame painted, a number of things should go straight on. Especially those bits I worked on while without the chassis. Both steps, both tanks, brake master & booster, Pedal levers, etc..

When I get back from the trip, I hope to have enough $$$ left over to buy a wiring harness ASAP. I'm also biding my time, trying to catch a former neighbour who is a retired mechanic. He may be enticed to do the engine rebuild for me. No hurry with that stage, just want it done well.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
  #6  
Old 07-12-12, 18:47
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Greetings from Honolulu, on the island of Oahu

Good morning, and greetings from Honolulu, on the morning of December 7th, the seventy first anniversary of the bombing of Pearl Harbor.

We arrived here early on December 2nd, local time, and have been touring Oahu and also the island of Hawai'i, known simply as "The 'Big' Island". The morning we checked into our hotel I met a gentleman in the hotel elevator who is one of the dwindling ranks of the Pearl Harbor Survivors Association. He is a tour volunteer at Pearl Harbor, and will be here doing that for the next month. Such a delightfully friendly old chap whose name eludes me for the moment. I see this fellow most days and hope to get his photograph (and name again) soon. Because I am using the 'tablet' device, I dont have easy way of uploading photos to MLU unless they are taken with phone, which is considerably lower quality than the camera I am carrying.

It was my desire to attend the commemorations at Pearl Harbor this morning, but now know it is to be a closed program for veterans, families of deceased veterans and of course dignitaries. This afternoon, Pearl Harbor is once again open to the public, and I plan to visis then. I may even see my newly acquired friend then.

This evening at 1800hrs there will be a large parade through Waikiki, which leaves Fort Derussy, heading eastward through Wakiki in direction of Honolulu Zoo. From the list of parade participants it seems to be more of a social event as opposed to a historical commemoration, but time will tell if this is indeed the case. Obviously I will watch the parade and take copious photos. I will also carry my phone, to take a few photos for MLU posting. You may recall I posted one photo of my Sons graduation evening some time ago now, and that was primarily to see if phone photos were sufficiently small enough not to choke while uploading to MLU.

At time of finishing this post, it is approaching 7:55am, the exact time hell broke loose at Pearl Harbor. I am dissapointed to report that a scan through local television channels has proven fruitless for any coverage of the ceremony which is either in progress or about to commence. In fact, a number of the locals had forgotten the signifigance of today. Not all that is, but some.

Lest We Forget.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)

Last edited by Private_collector; 08-12-12 at 09:22.
Reply With Quote
  #7  
Old 08-12-12, 09:17
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Pearl Harbor Memorial Parade

Well, I have just had a very exciting & moving day. This afternoon we visited Pearl Harbor again, took lots of photos there, then earlier this evening, staked a good viewing spot for the second annual Pearl Harbor Memorial Parade. The parade was truly wonderful. There were a vast number of school and community groups, with marching bands and great range of performances. Everything from gymnastics to hotrods, custom motercycles, and even some Low Riders. I do love the lowrider vehicles. They are just so impractical and bizarre that you gotta appreciate the damn things.

Unfortunately, no vintage or classic military vehicles. The U.S service personnel were splendid in presentation and drill. The stars of the show were undoubtedly the Pearl Harbor Survivors. My hands are gonna be sore tomorrow from all the clapping, thats for sure.

I was lucky to top the evening of with a good long chat with the gentleman I described in the previous post. He is Mr Alexander Dyga, and he was on shore on the morning of December 7th, 1941, and was initially in the vicinity of the fuel storage facilities which despite being identified as a prime target, were not bombed. Mr Dyga has served in the military for an extended period beyond WWII, and spoke about his time working with missiles at Vandenberg AFB and other locations, all the way up to the 1960s. I happened to have brought a book to read on the flights, about Gallipoli, and to cut a long story short, I gave it to Mr Dyga because he is interested in military history but had not heard about ANZAC or the Gallipoli campaign. In return, I was given a really good tip about where to eat cheaply in Waikiki. invaluable!
Attachment 53648
Bought a whole heap of stuff at Pearl Harbor, including copies of significant WWII newspapers, a couple of really neat military vehicle (Sherman & M16 half track) models in 1:32 scale, the mandatory T-shirt and a U.S flag which was flown over the Arizona memorial earlier this year, on Memorial Day.

Its now 2210hrs and time to retire to bed. Tomorrow morning I try the restaurant Mr Dyga told me about.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 18:02.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016