|
|
#11
26-12-12, 09:38
|
|||
|
|||
Darryl, the 8-13/16" dimension you wanted checked comes up as being 9-3/16"on the hull I looked at.
To give a further check I measured the distances from the outside edge of the body i.e. including the thickness of the side armour:- to hole centres:- Distance to first pair of holes 3". Distance to first group of four holes. (nearest holes in the group) 15-1/2". Distance to second group of four. (Ditto) 26-1/2". Couldn't measure to the centre group because they are covered by a welded plate mounting the stud for spare wheel attachment. David
__________________
Hell no! I'm not that old! Last edited by motto; 26-12-12 at 10:54. 
|
|
|
Threaded Mode