C60 cwt Signals CZMk IV

[Phil Waterman]

Hi Gordon

Here are some photos and drawing of the Tail Light Bracket from my HUP, maybe someone could confirm these against other brackets.

If the drawing is not large enough to read the measurements I can post a larger version on my web page.

All the extra lines are how I do the lay out to drill and cut before bending. When I made up the replacements for the HUP during the restoration I printed the drawing full size self adhesive label stock which I just stick on the steel.

Just realized that a dimension was missing the thickness of the steel 0.140 inches thick. Also the drawing shows a sharp bend while of course it is slightly radius-ed.

Cheers Phil